Top mount Ryder atachment for M8

[CripSkillz]

Hey guys I was wonderin if there is any kinda cheap top mount small surface mix torch parts i could hook to the top of my M8 so I could run a big tip on bottom

anyways thats it

Thx

[mmount]

National makes an 8R for the 8M, it takes pre-mix tips and gets pertty hot. That's what I ran before I got my Mirage.

[glassblowingBiker]

Yep thats the Way to go 8r/8m Better than a Red max and cheeper tooo Peace Jeff

[CripSkillz]

sweett
thx

So does what tip would I want to run on that any sugestions

[mer]

i started with that same combo. i loved everything about it except for the radiant heat and changing the bottom tips when the torch was hot from work. for the rider tip it's nice to have a few but i got the most use out of a #4. you can get a real strict pinner flame which is the one thing i couldn't get out of the surface mix tips for the bottom. the big bottom tip worked cadmiums and dichro better than my carlisle..... i miss that.
peace, m

[Pilgrim]

the 8m w/ the rider, a modified 3a is a great tourch set up ...i agree with that other monkey... i used a 7 around one tip was quieter and i liked it better for fumming.. i have some lovly burn scares from that old tourch...
scottland, Fredhead glass

[CripSkillz]

well it should be here tomarow, I got a HTC-1 tip for the ryder and a sm 21 for da bottom, should work great, well see tomarow

thx for da info guys

Oh ya is the htc1 tip a good choice for the top