Tubing for Jars

[oG Glocc Coma]

I'm still in my first few months of lamp working and as of now only worked 25x4mm tube and was wondering;

What size tube should I get for Some Jars?

I have done small size ones but I am looking for a larger jars. I'd say big enough to stick a whole hand in atleast. I didnt know if I could do that size on a 50m or if I should do like a 60 or 75

[justiceglass]

i make big jars like that out of a furnace... hehe

at the torch, i use 25.4mm to make jars in upwards of 3 inches wide. just have to gather a bunch up.

i also use 32 mm for jars depending on my mood. :D

one cool thing i found when making the top of the jar to fit a cork, if you dont have a reamer big enough you can use an extra cork you have as a reamer that is the size you need. drill a hole just add a cheap dowel handle wih epoxy and soak it in water and after you build up a good layer of carbon from use, just keep it wet and it will last a good while and make your jar tops really round and the corks will seal real good.

have fun :chilling:

[oG Glocc Coma]

Thanks, Will Post Pic's when get a finished product

PS- Anything I need to know to sandblast names on there or just tape and blast?


EDITED

[Pogo]

^I'd edit my post homie... That's a lil' too much info, if you ask me... Start your first sentence at "I am looking for..."

Edit your last paragraph in your first post to

I have done small size ones but I am looking for a larger jar, I'd say big enough to stick a whole hand in at least. I didnt know if I could do that size on a 50m or if I should do like a 60 or 75.


Let's keep it professional. You dig?

[oG Glocc Coma]

Thanks for the advice still lookin to get my point across as legal as possible.

Basically a medium sized jar. Not to big, but not to small

[TheGlassTree]

50x5 will make a jar more than big enough for all your travel needs

[nodice]

What kinda torch do you have?

[oG Glocc Coma]

What kinda torch do you have?
GTT Lynx

[bzglass]

Cut any size tube with your lynx to any hieght. Bam intant jar.

Want to use color and shape it? Use the above info to get a general idea of the size glass you want to start with.

[oG Glocc Coma]

Thanks forthe Help everyone, will post pic's when all done