one of my old posts

[steven p selchow]

Move after a few days..I posted a few years ago an address on where to get the cabinet/drawer pull hardware. I've searched my posts to no avail. I moved and lost the inserts, adapters to reduce the drawer pulls to the screw size, can anyone help me find the company I posted where I got mine? Appreciate it much..and thanks.

steve

also searched the board and my pm's too, can't find anything, it was a company in N.Y. I remember the part I beleive was red 101??

[STROKER]

steve are you looking for threaded brass inserts?
i have made many cabinet pulls in wood that i use the insertts for but nothing in glass.
rockler/woodworkers store/woodcraft, are all chain stores that most cities have at least one. you can get them from tiny to very large with metric and standard inards for the screws.
home depot and lowes around my house have a nice specialty parts section that carries a good range of inserts.
however there all brass that i am refereing to and that may not be what you want for glass?
how are they being applied? with heat and recess or glued into place?

[AYHEM]

im pretty sure nortel makes a set for knobs

[Firekist]

aftosa.com ?

http://www.aftosa.com/kwh.html

http://www.aftosa.com/or100ormorx1.html
http://www.aftosa.com/or10x1screw.html

this is where i got mine from a ways back..

---seth

[steven p selchow]

Thanks...no I posted the url in a thread a few years ago? A company from new york, but can't find it in my posts. The brass is maybe half inch long and screws into the outer neck to reduce the size for a common drawer pull screw. don't have to be brass since its inside, but I did find the pics I posted of one in a search already made if you want to go look, I have to go now, but maybe I'll repost it when time allows so you know what Im talking about, missing 100 cd's in the move, so maybe they were in that box, I have the outer part in a bag in my tool box, why I wouldn't of put the inner parts in there to I don't know....thats what moving does to ya after living in the same house 16 years.

steve

[somewhere]

Hey Steve I know it's liberty brass (718)784-2911 but unfortunately I do not have the part numbers. I'll poke around and get back to ya.

[somewhere]

Hey the packing slip is still in the box.

118raw the outer
Red101 reducer

[steven p selchow]

Thanks man...yeah that red 101 rings a bell, but I didn't think it was Liberty brass.

Steve

[Swampy]

Strange, I can vaguely remember the actual post you mentioned but not what I had for tea last night :o)

[somewhere]

Ok with great determination I found it:

http://www.talkglass.com/forum/showthread.php?t=8784&highlight=cabinet+knob+hardware