When I grow up, I wanna Ro$$

[Pogo]

Or not. Inspired by some sickness I seen months ago at AGI, I decided to try my hand at the micro. First attempt, and just for fun. And, yes! It is Fully Functional!!!!!



When I grow up, I wanna Ro$$.
34975

[drew1492]

Midget's like to burn as well.

That is damn impressive.

[CDot]

smaller!!!

[jac1961]

Nose burns!

Cool work, perfect for Barbie's doll house.

[Icarus]

The Ro$$ is strong in this one.

[AWhiskeyDrunk]

nice one dude...

[Bo Diddles]

Nice one Pogo

[Mecha]

Where did you get that giant dime and huge rubber hand?

Nice piece man!

[jes]

Looks Trikky !!!

[vetropod]

small is good!

[2wheeler]

what size of downstem did you use?

[Julian]

Who's growing up, Pogo or the bubbler?

[Aymie]

That's got nothing on the mini I got at AGI the year before. Six sections, three horns, and two marbles, including a Micro AGI milli. Made by Joe Blow.

[HOSS]

They grow up so fast

*tear*

Nice one little buddy!

[Pogo]

Thanks guys :D

The down stem is 12.7 condensed and pulled to like 2 mm

Awesome piece Aymie! The first micro I ever seen was a Joe blow, and it was him and budman ro$$ that were crushing micros this year at Agi.

[sleepingpeople]

love the bangers

nice one dude, sweet MP. Aymie i realllly like that one you gots

heres a few quave has done

http://www.glasspipes.org/Images/FullSize/000274000/Img274580_recent_work_2010_1.2_019.JPG

http://www.glasspipes.org/Images/FullSize/000242000/Img242616_021_2_.JPG

http://www.glasspipes.org/Images/FullSize/000276000/Img276010_fresh_2011_work_009.JPG

http://www.glasspipes.org/Images/FullSize/000276000/Img276009_fresh_2011_work_006.JPG

http://www.glasspipes.org/Images/FullSize/000281000/Img281628_work_march_2011_014.JPG

http://www.glasspipes.org/Images/FullSize/000283000/Img283931_april_2011_glass_011.JPG

http://www.glasspipes.org/Images/FullSize/000283000/Img283928_april_2011_glass_007.JPG

http://www.glasspipes.org/Images/FullSize/000283000/Img283927_april_2011_glass_005.JPG

[Aymie]

Holy fucking shit. That one next to the cig is insane.

Craig pulls down 9.5, then pulls that down again.

I wanna see pics of the ones from this year. Me and Jeremy will have to make team jank minis next year.

[vetropod]

Holy fucking shit is right, Willy's Doppelganger definitely takes the cake here.

[Bo Diddles]

I just don't understand.... This hurts my head.
Amazing.

[Rowdy]

Damn sweet mini's everybody! Those multi section ones by Quave are insane!

Good luck, Peace

[IndiePendent]

This thread should just be about the sickest minis... so everyone get to your torch :)

[STROKER]

This thread should just be about the sickest minis... so everyone get to your torch :)

^^^cool idea.
here is one i did today. thanks for lighting a fire pogo.

[jac1961]

^^^ Dude, I really like that one too! : )

[Bo Diddles]

Daaaamn Jay! Nice one!

[Pogo]

Sweet Tits, Great work Stroker!! Glad others got the micro bug as well...

For those who don't know, other micro pieces that you have to see are made by "Gremlin" and "Trilli Glass(R.I.P.)"

Come on, kiddos, let's see your mini-work... Our own Budman8778 is a Sick moFo at the molecular level...
KEEP THE PICS COMING!

[themoch]

stupid amounts of work in those things... i don't really want to go down that road.

[Dubbz]

I may give this a shot when I get off work in december, on a scale of 1 to 10, what would you say the difficulty is on one of those little mindfucks?

[themoch]

42

[STROKER]

42

hehe, that is a close number if not a bit low...:twitch:

here is another i just finished. got a bit big to call a mini but its still pretty darn small.

come on, who else is gonna post a pic besides me and pogo

[berning]

damn it pogo , like i don't already have enough to obsess on . now i'm gonna be seeing micro prep in every piece of scrap.

here's my first attempt. 4 milli , 2 mibs and a worked downtstem.

[vetropod]

Heck, I might try my hand at a solid, soft-glass mini :D

[Kato]

make a life sized ant!^^

[vetropod]

make a life sized ant!^^

How's about this?
http://www.wesleyfleming.com/gallery/available/_sold/ant_small-black.jpg

I make lots of spiders this size, too:
http://www.wesleyfleming.com/gallery/available/spider_small-black.jpg

[vetropod]

But this is Pogo's thread, or the mini-bub thread. Still wanna make one of those, but it'll have to be in soft glass and solid because I suck, instead of blow, when it comes to hollow stuff. Gotta hand it to you all, in that category :D

[Aymie]

What if someone made you a mini and sent it to you, and you made a creepy crawly to stick on it...or better yet a giant centipede smoking out of it?

[smolder holder]

What if someone made you a mini and sent it to you, and you made a creepy crawly to stick on it...or better yet a giant centipede smoking out of it?

+1!!!

Aymie i always read your website as butterfly boobs lol!

Great work on the minis folks i need to get my new shop up and running soon.

[Pogo]

Mini hookah giant centipede +1

[vetropod]

I'm down with that, fun idea Aymie!

I've been wanting go through the looking glass for a while, tried to make a piece like that with a friend in MT but he wasn't up (or down?) to the size.

It'd have to be uber-mini, FYI...

So who's on like Donkey Kong? :tantrum: :bouncy:

http://upload.wikimedia.org/wikipedia/commons/thumb/5/53/Alice_05a-1116x1492.jpg/449px-Alice_05a-1116x1492.jpg

[Dubbz]

42

Yikes, well I guess I'll find out how many fuck ups I can make before I get it right.

[Aymie]

I am totally interested in the looking glass piece.

[vetropod]

Aymie, you've got my address... let's do it! :bouncy:

[Aymie]

I have never even attempted a mini, but what the hell. Sounds like fun. Especially if I get to send it off to be paired with a bug.

[SOCK]

I like Aymie's FO SHO!!! My favorite piece I own Is a Joe Blow. It not a 6 section mini but i still love it haha

[Aymie]

I am going to attempt a mini today Wes! I finally pulled my own tubing.

[Pogo]

I pulled my own tubing once. Felt so good I did it again.

[kage]

repitition is key

[ithruxix]

pull too much, you might go blind.

[Glasscutter]

Wow man, that is some sick work. Really Nice pieces.

[J Howard]

pull too much, you might go blind.

i do wear glasses

[kage]

Here's my first mini. Made this a while back when this thread was started and forgot about it. Lost it, found it, took pics then forgot about it again. Not as bo$$ as the rest but its an 8pc counting the horns.

42490

[Pogo]

Super ill micro linework. Is there a downstem in that booger? where's the carb? :D

[Lever2stackS]

Holy crap how have I not seen this thread yet. This is just insane my hat's off to all you you micro worker's my mind is officially blown.http://www.thefreshzone.com/images/smilies/bowtotheking.gif

[kage]

Lol, it has neither pogo ;) plus I'm still freakin over that smaller than a cigarette butt piece..
I'm still striving for bo$$ status but one day when I grow up...lol

[Mecha]

Nice piece Kage.

That line work is super tight for such a small can. I can see how it could get lost.

[Dan Kooper]

That ciggy but one has to be solid..... Right?? How would you keep a hole in something with a ciggy but sized can. Ima get some scraps together from tube pulls and try one. I want some mini pipe pendants. I'm gonna try super small solid for a start.

[STROKER]

nice job k-man.
i agree wth mecha on the tight lines in a tiny place.