Where to buy Fuji Controllers? Voltage question?

[big tom]

Hey everybody. Does anyone have a source for Fuji controllers? I checked ebay but didn't find much. Just a couple of used ones there. It's for an Aim 99lsd, or an Aim 2418.

Also: I had a broken 99lsd(110v) so I stole the controller off of my 2418(220v) and got the broken kiln going. I didn't even consider whether the controller was voltage specific. Does anyone know if they work for both 220v and 110v? Seems to work but I only turned it on for a minute.

[Shapeshifter]

instrumart is a great place to buy controllers. The tech support is awesome. https://www.instrumart.com/products/4714/fuji-pxr3-temperature-controller

[Shapeshifter]

If you are not sure what options you want just call them and they will help you out. They have always solved all my problems

[Shapeshifter]

I will mention that if you buy one off ebay it will most likely be programmed to control a coffee machine or something other than your kiln. It can be a real hassle to get it reprogrammed to control a kiln and sometime is not even possible. Looks can be deceiving. I would say it is worth the extra money to get the right one the first time

[big tom]

Thanks man. I was hoping to find a better deal but that's a plan b for sure, Got the specs there and now I know the controller is compatable with 220v or 110v.

[Hung Low]

If you do have to reprogram one, you can call Fuji and tech will walk you through reprogramming.

[big tom]

If you do have to reprogram one, you can call Fuji and tech will walk you through reprogramming.

Thanks Hung. Do you have that number?

[Hung Low]

Thanks Hung. Do you have that number?
Fuji
800-235-8367

[big tom]

cool. just picked one up for $90 on ebay. Thanks guys!