rockit foot pedal setup? mirage, 10lpm, T tank

[supercoolspaceman]

hey there guys and gals. i have been running my lynx flame off of a 10lpm for a few months now. I just got a T tank for a super good deal and am trying to figure out how to set my foot pedal up so my lynx will run soley off of the concentrator and my outer rings will run off the tank.

any help would be appreciated. ive set it up once before but cant seem to figure it out .

[Mute]

as long as it isn't a 2-stud you should be fine.

just hook the outer ring up to the T-tank via regulator. foot pedal in the line.

maybe i'm missing something here...

[BORO]

Does a rocket have the line splitter right on the side of the pedal? Normally that lines that bypass the pedal go to the lynx.

If the lynx is on its own line/10lpm...... You would need to plug the lines that bypass the pedal. Like put on short pieces of hose and plug/clamp them. Or find the right fittings to plug the extra lines. I would melt two tapered rods. One to fit in each short cut hose. Clamp one end on the pedal clamp the other end on that glass rod nice and tight.

93385

The rest is like mute said. Just run the tank lines through A regulator to the pedal to the outer fire.

[OceanMelt]

Yep - I just plugged the port on my pedal. Running oxy con for center and tanked for outer.

Part: https://www.homedepot.com/p/Everbilt-1-4-in-MIP-Lead-Free-Brass-Pipe-Plug-Square-Head-802379/207176376

[BORO]

^+1

[supercoolspaceman]

Thanks guys . <3