-
Article Categories -
Recent Articles
-
Tutorials and DIY
by Published on 06-10-2014 12:19 AM Number of Views: 11688
I just finished making a small manual crusher for making small quantities of my own frit. Being my 2nd attempt, there are ...by Published on 06-09-2014 11:37 PM Number of Views: 9766
Now that my CC has been converted to a 4 stud I need a foot pedal to speed things along and cut oxygen consumption. So lets ...by Published on 06-09-2014 11:28 PM Number of Views: 8753
My friend has a 4 stud GTT mirage with a foot pedal which he let me use frequently.Then I purchased a 4 stud GTT Mirage. ...by Published on 06-09-2014 11:26 PM Number of Views: 6890
I posted a free filla tutorial on my facebook. link below
https://www.facebook.com/media/set/?...1&l=af19fa3baa ...by Published on 04-19-2014 02:26 PM Number of Views: 7176
I got a few requests to explain my footpump setup a little more, so here are some pics with explanations. I have talked ...by Published on 03-19-2014 11:24 AM Number of Views: 7598
Hey MP, I've learned so much here so I want to share some of my knowledge with you guys. Here for your learning is a photo ...by Published on 12-16-2013 08:48 PM Number of Views: 6364
I was walking through the hardware store today when I got an idea.
I picked up an all metal keyless drill bit chuck and a handle meant to mount files in, and $7.97 later I had my new favorite tool.
The 1/4" ...by Published on 11-07-2013 04:35 PM Number of Views: 12229
Hey all,
So my last time checking out griffin glass, I ran across these. http://www.griffinglass.com/index.ph...mart&Itemid=35 ...by Published on 07-08-2013 01:10 PM Number of Views: 8810
Hey MP, I've learned so much here so I want to share some of my knowledge with you guys. Here for your learning is a photo ...by Published on 03-29-2013 08:23 PM Number of Views: 11945
I mentioned in another thread that I tried doing a stringer vac stack and was gonna post some pics today... Well here it ...by Published on 03-27-2013 10:48 AM
First off this is pretty common sense.This may not be the best way , or the fastest , but if you are limited to a smaller ...by Published on 03-15-2013 05:02 AM Number of Views: 5400
been meaning to do this for ages, hope it helps someone out.
1 heres whatcha need, ( not ...by Published on 02-01-2013 07:24 AM Number of Views: 13184
This is for installing a Mercury Contactor in the paragon F-130 model, I do believe the parts are the same for the 120's ...by Published on 01-22-2013 03:56 PM Number of Views: 9855
The most common technique request I have seen go by unfulfilled on the forum has been double layered work. So here it goes, ...by Published on 01-02-2013 07:46 PM Number of Views: 3000by Published on 08-31-2012 08:26 PM Number of Views: 3840
Recently made some color racks with Kato up at his shop. Since this is in the tutorial section I'll try to be easy to follow, ...by Published on 08-30-2012 11:08 AM Number of Views: 3887
here are some photos on the way I make The Teapot "Tea bag".
The cylinder is A 80mm diam 3,5mm thickness: ...by Published on 08-29-2012 12:11 AM Number of Views: 5885by Published on 08-18-2012 05:38 PM Number of Views: 8897
Greetings All,
I was planning on doing this a long time ago, but got re-inspired once I saw another recent ...
-
Recent Forum Posts
Featured Member's Spotlight!
Donate to our forum!
Re: Is this forum still active?
We're here!
AxisWolf 09-30-2024, 06:38 PM