Brass Reamers, Bowl Pushes and Tree Jigs Smoking prices

The 1" brass tools are back in stock and flying off the shelves,get them while they are hot!!!!!!
The 1" tools are back in stock and flying out the door. Get them while the sale lasts!!!!!!!

Reamers
1/2" brass reamer 2mm-12mm 5" long $40 **SALE PRICE $30**
1/2" brass reamer 6mm-12mm 3" long $40 **SALE PRICE $30**
3/4" brass reamer 2mm-19mm 5" long $45 **SALE PRICE $35**
3/4" brass reamer 8mm-19mm 3" long $45 **SALE PRICE $35**
3/4" brass reamer 2mm-19mm 2" long $45 **SALE PRICE $35**
1" brass reamer 2mm-25mm 5" long $65 **SALE PRICE $55**
1" brass reamer 14mm-25mm 3" long $65 **SALE PRICE $55**
1" brass reamer 2mm-25mm 2" long $65 **SALE PRICE $55**

BOWL PUSHES
1/2" brass bowl push round (no tip) $35 **SALE PRICE $28**
1/2" brass bowl push w/tip $35 **SALE PRICE $28**
5/8" brass bowl push round (no tip) $37 **SALE PRICE $30**
5/8" brass bowl push w/tip $37 **SALE PRICE $30**
3/4" brass bowl push round (no tip) $40 **SALE PRICE $32**
3/4" brass bowl push w/tip $40 **SALE PRICE $32**

Put in a order today, They helped me out over the phone. Good cust. service so far. Thanks for making this happen. That's how you get rep. Party on.

Anytime. Thanks for the support!

whats the info in the jigs?

1/2" brass reamer 2mm-12mm 5" long $40 **SALE PRICE $30**
I want to buy one of these its the second to last one on the last picture right how do we go about this?

Yes that is the one in the picture. Send me your email with everything you want including length if they are reamers and I will send you an invoice thru paypal and I can have it in the mail by tomorrow am. Thanks
Dawg.

The tree jigs pictured are priced as follows...

13 arm tree 9.5mm with a 25mm upstem $80 ***SALE PRICE $60***
10 arm tree 9.5mm with a 25mm upstem $80 ***SALE PRICE $60***

My tree jigs are all machined and milled out of high quality billet and are a 1 piece construction. Each jig comes with a thumb set screw to secure the upstem. These tree hold the 9.5mm arms nice and snug. This makes building those trees so much easier and cleaner! So don't be fooled by those mass produced sloppy cheap'O tree jigs that are running around that your arms just fall out of, Pay for the best and get the best right here at Dawg House Glass where we care about what the glass blower needs Cause we are glass blowers making glass blowing tools.The tree jigs pictured are priced as follows...

13 arm tree 9.5mm with a 25mm upstem $80 ***SALE PRICE $60***
10 arm tree 9.5mm with a 25mm upstem $80 ***SALE PRICE $60***

^^What is billet? All I can find is that it is scrap metal melted down...

billet aluminium is a very light weight high quality aluminium. These bad boys are built to last.

Right on..saw it could be steel, just making sure

No worries. Got more to the line as far as the smaller jigs just trying to concentrate on the demand for the bigger trees for the 65mm plus tube sizes right now. Let me know if you have any other questions.

so is one of these a 1:10 for making joints?

No. I do have a 1:10 ratio on a ground joint tool for 19mm females in brass that has been made and is in trial stage at this time.

Here is a quick picture of some of the 1" tools.

Just curious why are you bumping two threads with the same information?

Is anyone who bought these receiving there tools yet? I paid via paypal on the 20th and have not received my tools yet. After I emailed him on the 25th he did respond saying they would go out in the AM but nothing yet....not saying anything bad here but I"m starting to not like that this thread is bumped every day but no tools yet for me...Will update this they do arrive.

Scott,
Really man? All my people get their tools. What are you saying I'm trying to rip people off????I told you that the 5/8" brass bowl pushes were being made and the order would be sent out as soon as they were completed. The 5/8" bowl pushes were finished over the weekend and even though we are closed on Mondays I still got you package out in the mail for you (your welcome). The proper way to handle a problem would be to send me a message rather than try to discredit me as a tool maker or my ability to ship. I assure you that you will recieve your tools as stated to you before. Your package was shipped yesterday and can be tracked at www.usps.com and your tracking number is 0311 2550 0002 8392 0252 and I am posting it so that anyone on here can see that I'm legit. Sorry to keep you waiting but these tools have been selling like crazy and I'm only one man making them they are not mass produced in a wherehouse in China. Quality tools take time and I'm doing my best to keep up with the demand. I currently have my tools being set up to be sold through 3 major distributors to help them with their demand so I have been working long hours. Again sorry for making you wait so those extra few days but it is the nature of the beast my friend. I hope you enjoy the tools and understand my situation. Thanks again and hope to see you come back!

Take a good look at the new 2 in 1 tool from Dawg House Glass. A solid brass 5/8" x 8" long handle with your choice of a 5/8" or a 1/2" bowl push on the end of the handle with or without tip and your choice of a reamer combo on the other end for one low price. Handles are universal with any DHG made tool heads so you can mix it up. Tool handles will be sold with your choice of 3/4" reamer head for $90 and 1" for $100. That's 2 tools in one hand what???? Message me with any questions.

Quote:

---

Originally Posted by Twisted Minds

Scott,
Really man? All my people get their tools. What are you saying I'm trying to rip people off????I told you that the 5/8" brass bowl pushes were being made and the order would be sent out as soon as they were completed. The 5/8" bowl pushes were finished over the weekend and even though we are closed on Mondays I still got you package out in the mail for you (your welcome). The proper way to handle a problem would be to send me a message rather than try to discredit me as a tool maker or my ability to ship. I assure you that you will recieve your tools as stated to you before. Your package was shipped yesterday and can be tracked at www.usps.com and your tracking number is 0311 2550 0002 8392 0252 and I am posting it so that anyone on here can see that I'm legit. Sorry to keep you waiting but these tools have been selling like crazy and I'm only one man making them they are not mass produced in a wherehouse in China. Quality tools take time and I'm doing my best to keep up with the demand. I currently have my tools being set up to be sold through 3 major distributors to help them with their demand so I have been working long hours. Again sorry for making you wait so those extra few days but it is the nature of the beast my friend. I hope you enjoy the tools and understand my situation. Thanks again and hope to see you come back!

---

Weird post man...