Attachment 77207
Printable View
This thread is alot of fun with so much cool work. Keep em coming yall.
Here is a little 10mm I'm trying to work the kinks out on.
fumesniffer, i'm envious of your sig, that is some good stuff right there :)
nothing special, just a white rose. i did get asked to do an article in Glassline in the near future. yes it sucks that i won't get a print copy, but oh well i'm still honored!
Attachment 77222
that's awesome man, congrats =D
Damn Nice marble and congrats on the article!
http://images.tapatalk-cdn.com/15/08...0272c15bce.jpg
Seeing as how I never get to keep any of my glass, I made this for myself.
Sent from my iPhone using Tapatalk
^ sweet colors
loki's lipstick and europa star, and thank you!
I'm liking the way this tube is coming out , I'm looking to find a new look I've haven't seen before , going to do a full beaker tube , just have the neck need to make a beaker for it https://vimeo.com/135829590
first time trying some reptile-esque tech on some random striking colors I had laying around. Made some chillums out of the sections. lemme know whacha think!
http://i.imgur.com/WJ8TaM6.jpg
8.5" Minitube and accessories.
Pushing the limits in terms of what I can fit into my little SC3.
http://i.imgur.com/xkKkT4v.jpg
Looking good man
Sent from my XT1254 using Tapatalk
first couple small rigs i made. i know they do not compare to any of the killer glass art in this thread. But im learning damnit.
those look a LOT better then some of what i see going around. imho, great job. keep at it!
those rigs are pretty badass IMO. The wu tang one is great. There is nothing wrong with simple when it is clean as hell
old school fumed bubbler
Attachment 77319
Attachment 77320
Attachment 77321
Fresh out of the... Tank.
Attachment 77335
Fun with leaves
Attachment 77352
Nice woodies!
http://images.tapatalk-cdn.com/15/08...6445980a47.jpg
Sent from my iPhone using Tapatalk
Still at 1050, saw the rainbow after i took the shot.
ATTACH=CONFIG]77363[/ATTACH]
Figured , clean window , crooked kiln lid.
Or dirty window , with a level table. (this shot is current 7:46est)
Made on the 40mm.
Attachment 77364
Awwww sideways, silly windows phone.
Made my first fully worked tube today, trying to find a patter /look I haven't seen before , I'm calling it piedpipertech or just piper tech lol
<br />
https://vimeo.com/136260292
lines and bubbles and fumes. this is the third vac stack i've pulled that wasn't laughably cracky.
http://i.imgur.com/V86a3pC.jpg?1
http://i.imgur.com/fHbWwkf.jpg?1
http://i.imgur.com/60aI7ga.jpg?1
Made my first mini tube rig thing. Its pretty ugly but I'm proud of it since it functions. It's got a 3 hole diffy. Still trying to figure out the best way to drop these downstems straight without ruining the sidewall. Im not using round bottoms instead of the straight hole so I cant use a 4mm to guide it.. The can was going to be a bubbler, but I decided to make it into this haha, it could have been a little wider, but it stands surprisingly sturdy. Its 8 inches tall, with a 14mm female joint I made with an old quartz nail and a bunch of wax.
http://i.imgur.com/CJBmrpx.jpg
made another. happier with this one.
http://i.imgur.com/nQclIJC.jpghttp://i.imgur.com/Xzz5i86.jpg
My welds really need work, especially one ones around the downstem. Any tips on these? I gotta get myself a hand torch.. http://i.imgur.com/RCDSuYd.jpg
Attachment 77489
my Buddie
Jeremiah over at seven10 glass killing the rainbow fades
sick fades james =o
herb i'm no epxpzert, but the books i've got suggest supporting an inside seal like that with asbestos tape (i've used cardboard rounds..), tagging it to the inside so it's connected, then popping the hole in the outer tube so it just kind of naturally seals nicely. this also allows you to make a sexy down tube instead of trying to fuck with it after it's sealed up inside.
when i do this, it's with the bottom of the outer tube open, i'll plug it when i blow the seal, then after the outer stem hole is popped i'll pull the cardboard and close up the outer tube bottom, plugging the downstem hole with an earplug (or if it's hot, my bowl push).
here's something similar, a prototype i've been working on for a "stupid bong" series i've been feeding a friend of mine for a couple of years, because he likes stupid bongs..
http://i.imgur.com/qLBJt2b.jpg?1
the stage below the bowl is a typical downstem but the second stage is the side seal. i wish i had better pics, but this one is gone now =/
I definitely dont follow, but im probably doing them completely wrong anyways haha. I gotta do some research. That "stupid bong" bub is awesome, reminds me on the recycler-locks J. Lee was doing recently.
(see fancy drawing below)
http://i.imgur.com/jZ6dVUU.jpg?1
then you add your whatever like a regular T-seal, and anneal the fuck out of it, and never heat it up again, for any reason, or god help you. glass is really unhappy when you do stuff like this. =p
ol' timey horny tubes.
http://i.imgur.com/QGjTrPN.jpg?1
http://i.imgur.com/roY75p2.jpg?1
made this little guy the other day. 14mm. just under 7inches tall. My welds are slowly improving though!
http://i.imgur.com/Ksin1uf.jpg
My 30 oz beer mug from agi last week.
I'm still recovering.....
More like fresh into the kiln, but this is what I made for the Glassline article.
http://images.tapatalk-cdn.com/15/08...b4f146108f.jpg
Sent from my iPhone using Tapatalk
And yes that mold has seen better days, but it takes a licking and keeps on ticking.
Sent from my iPhone using Tapatalk
Attachment 77563
Attachment 77564
my first fade piece
Mo viggen and vaagen shyaa.
Attachment 77566
this is what happens when the guy at the gas station finds out i blow glass..
http://i.imgur.com/tPpkOTw.jpg?1
^^ that's great! i've got this friend who's neighbor is a raging alcoholic, and smokes out of a crushed can. won't even buy a $20 import pipe. so what i'm going to do is take a blue beer bottle (i don't recall which brand has blue glass bottles), preheat in the kiln, punty up with boro, attach boro blow tube, pop a hole make the bowl, pop the carb and then use grabbers to remove all traces of the punty/tube/handle glass and give it to him. i think he'd appreciate it, but idk how well bottle glass will hold up to heat when being used.