Just go to start a new thread at the top of the members glassified or vendor page. Make sure to check in with PyroChixRock if you need a vendor badge. Good luck and welcome to the melting pot.
Printable View
Just go to start a new thread at the top of the members glassified or vendor page. Make sure to check in with PyroChixRock if you need a vendor badge. Good luck and welcome to the melting pot.
OVglass,
All joints these days are made different depths and out of different thicknesses so it could be made but it would fit the joint size that I measured it up to. Also think they would have to be made as a pair and octagon and a cone for finishing it off smooth.
you have joint grinding tools? 1:10 ratios?
1:10 ratio on a octagon style brass reamer. I'm working on another batch now.
please happenQuote:
Originally Posted by Twisted Minds
Depth is not what counts with this. They 95% of them are made to a 10:1 taper. The taper is what matters on this.Quote:
Originally Posted by Twisted Minds
BTW: Great looking tools. I plan to pick some up as soon as I get some extra scratch.
Just go to post new thread at the top of the glassafied or vendors classafied page. Make sure to get a vendor badge if you plan on putting items up for sale. Good luck and welcome!
i make joints with the graphite one i posted a lot, no need for a coned one. Problem is they do wear out......brass one= that problem solved!!
I would also be interested in some 10:1 reamers. One for 18mm joints and one for 14mm joints.
Looking good there Bob nice line of tools, glad to see you made it here.
Thanks Swampy happy to join you.
I should be able to post the proto type ground joint tool this weekend. I will post a picture after I use it a couple of times to show the joint with it. Should be able to keep the cost down on these and not to crazy!
How do you get a higher rep status?
How does one get a higher Rep status???? I mean Rep Power 1 lol.
people have to" rep" you
The 1" brass tools are back in stock and flying off the shelves,get them while they are hot!!!!!!
Reamers
1/2" brass reamer 2mm-12mm 5" long $40 **SALE PRICE $30**
1/2" brass reamer 6mm-12mm 3" long $40 **SALE PRICE $30**
3/4" brass reamer 2mm-19mm 5" long $45 **SALE PRICE $35**
3/4" brass reamer 8mm-19mm 3" long $45 **SALE PRICE $35**
3/4" brass reamer 2mm-19mm 2" long $45 **SALE PRICE $35**
1" brass reamer 2mm-25mm 5" long $65 **SALE PRICE $55**
1" brass reamer 14mm-25mm 3" long $65 **SALE PRICE $55**
1" brass reamer 2mm-25mm 2" long $65 **SALE PRICE $55**
BOWL PUSHES
1/2" brass bowl push round (no tip) $35 **SALE PRICE $28**
1/2" brass bowl push w/tip $35 **SALE PRICE $28**
5/8" brass bowl push round (no tip) $37 **SALE PRICE $30**
5/8" brass bowl push w/tip $37 **SALE PRICE $30**
3/4" brass bowl push round (no tip) $40 **SALE PRICE $32**
3/4" brass bowl push w/tip $40 **SALE PRICE $32**
Here is a new pic of the 1" brass tools. Fine work for a great price how can you go wrong?