Some new stuff

There is a tutorial here. Almost dead nuts what you're looking for chad.

Looking great crip - I wish I had the time to spend on this stuff like you obviously do! I like the bumps in front of your hoppers.

[QUOTE=chadpinkerton;322499]

find out from the search or start your own thread. :D

Thx GP ya i dont have to do any prodo so i basically jsut go out n try whatever i want anytime i can, makes it fun..

Ya chad start your own thread damnnnn. :)

anyways here is some shizt i been messin with sence i hooked up the old torch..

been messin with black and cobalt tube, top is a blow in and it blew all the way in i was stoked, but i keep jackin up the fume or im just not workin it right, cuz i get reduced spots n bad devit on the tube when i do outside work,,

oh well i got 1 week to make a good set of shot glasses for my buddys wedding. I should figure it out by then,, i hope

at least the amber purp is startin to come out right..

havnt done much this week, I need to get on the ball..

http://cripskillz.com/pics/gldg/3981.jpg

http://cripskillz.com/pics/gldg/3979.jpg

witch ball came out crappy but i think the next might be better after the help i got here..

http://cripskillz.com/pics/gldg/3982.jpg

Ummmm been lazy lately, been hot as hell n just not feeling motivated

but any ways i made a big thicky for my buddy he likes stealers colors, so black tube yellow lined encased in 50x3.5 its thick as ya thick, the jar was my first try so its thick thick tooo, coiled blow in, should have blown it out more cuz there is only an inch in the bottom heheh oh well ..

http://cripskillz.com/pics/gldg/3995.jpg

http://cripskillz.com/pics/gldg/3991.jpg

Are you using the china black tubing for those? I've got a couple small sections, tried making a spoon blow-in with it last night but it kept busting REALLY easily. Two attempts, one almost completed but... :bangHead:

The fumed/blow-in effect looks bad ass though with the black.

Looking good man. That spoon looks bad ass, I like y/b too.

Ya GP im using the china black, and breakin shit too,

i was on a mission to break stuf all night

I still cant get the fumed blo ins to looks good, i even fumed the hell outa the blank this time and still no coolness,

then it broke so i tried to salvage and dropped the whole mouth piece on the floor after it hit my leg n melted my shorts, but it didnt break, so it all went together,

made some hooka parts too that kinda matched the theme way to thick though

and a couple of bench scrap pickup marbs heheh

http://cripskillz.com/pics/gldg/3996.jpg

http://cripskillz.com/pics/gldg/3997.jpg

http://cripskillz.com/pics/gldg/4001.jpg

That shroom bowl is pretty kick ass Crip.

Not sure wuthappon'd with your black blow ins. Put a pic of the black crack in the pics forum somewhere. I kept having a hard time getting the fume to take to the clear glass. Seemed to take forever then it's too much. Turned the oxy on my con down and took it into a fairly reducing flame and it finally started to show. Had to get it almost dark golden looking before I hit it with a good oxy flame to strike it up a bit. It was pretty darn thick on there but it gave a pretty decent effect. Also - the black was all mucky looking by the time I blew it in. Don't know if that helps it or not as I don't know much of anything other than the flame is ripping hot yet. Catchin' on...

Did you fume then w/r the stem on the black bowl one? Pretty cool lookin'.

that , little wrap/rake is dope. you probably dont even need a lighter to use it.

Thx guys

Ya that lil guy was actually just a momka rod spun on, "tried to spin" on more like chunked it on and spun a lil but gettn better at it.

the mouth piece of the black head is spun on blue amber purple then raked no fume,,

as for the black mucky i was getting that too, till i really started raging the oxy that helped that out..

ya my fuming is always shady, sometimes good sometimes it just never shows up kinda weird

which momkas? i thought it was some sort of cane. if you want to use that black tubing up, you cane fume it and w/r it too. the only w/r i really do are colored tubing and fume. just jet the whole thing fumed good with a nice metallic sheen, and w/r with clear .i usually do it in blotches of silver and gold, so some places are just silver, some just gold, and combinations of one over the other. it gives a ton of different colors, i like to twist my rakes when i do these too. you can also fume it half & half length wise or side by side. either way they all look good. i thought it was a cool spin on the whole wrap and rake thing.. anyways

not sure which momka but it has lots of colors in it that are encased in the rod

Ill try it one of these times

lastnights crap , the mib came out good but the implosion lost detail on the initials so that kinda jacked and half of the dots that were suposta be liek a trans purple just disappeared

and i tried my first fumed bat last night lil wonkey but the color should be good gold n silver diff layers ,

http://cripskillz.com/pics/gldg/4003.jpg

http://cripskillz.com/pics/gldg/4005.jpg

lookin good man!!

Good job with the fume work in that chillum!

wheee tryed my first Dom skull lock last night, didnt want to waste color so i just used blue tube and some cobalt for the face stuff wif a lil fume , i think ill try some more later it was a lil easier than i thought.., still took me better part of 1 1/2 hrs, i was happy

http://cripskillz.com/pics/gldg/4010.jpg

http://cripskillz.com/pics/gldg/4012.jpg

NUICE! your skills are rocking man, I wish I could do a tight lil lock like that

nice job, that looks pretty sweet.

NICCE Crip... hows it working with that torch ???

lookin good bro. Kind of hard to see the details but the shaping looks really good. Right on.

Hellz Yeah dude!

cool dude, good shaping.for real though, it looks like your skull just got off safety break.lol i thought it was awsome, people should start making "nice guy" skulls and shit. good work