Some new stuff

Those ought to color up pretty nice man.

Tried to make a honeycomb cane last night, dont think i fumed the rods enuf, it didnt come out good, tried it in the pendant on right and cant hardly see it..

i guess i cant flatten pendants eitehr i jack up my implosions when i flatten it bahhh..

oh well to the next failure..

http://cripskillz.com/pics/gldg/4109.jpg

Yeah but what I do Crip is put that janky looking pendant shape on the end of a tube and it looks wikid on the end of a pipe.

Hey bro just flatten a little at a time as you are doing the implosion (dont let it go completely round) punty up to the back, tear it off and melt in your lense.

Ill have to try that,

well got pissed this morn spent like 2 1/2 hrs on this bitch then it was cracked this mornin. AHHHHHHHHHHHH sucker was heavy too 7 ozs..

2 silver seaweed blowins that looked tight finally, till i saw the cracks umhhhhhhhhh.. arrows mark the cracks they dont go all the way thru just the top layer of clear

anyways made a spooon too, 1st right side carb heheh, might try to fix teh biggie tonight well see what happens..

http://cripskillz.com/pics/gldg/4126.jpg

http://cripskillz.com/pics/gldg/4125.jpg

Not bad mang. I hate silver seeweed for blowins tho. Try some irrid or other striking color that have a small amount of silver, momka silver iris is cool. With the schott its easy to get some awersome effects by striking.

whats wrong with silver seaweed? i made som nice ones with it got royal purple. it also looks great and different in a blowout, the color of green and red kelp.

Ya i kinda liked the silver seaweed didnt look any green by the time i was doen but did have a lot of color,, and i fixed the cracks no prob i was happy,

made another piece toker last night not to bad,, but nothin special either..

http://cripskillz.com/pics/gldg/4128.jpg

thx, more crap from last night..

http://cripskillz.com/pics/gldg/4130.jpg

you take the good

you take the bad

you take them both and there you have

the facts of life, the facts of life


Keep it up man! Those aren't terrible. and i'm sure they will sell quickly.

I like the peace pipe!!

youre deffinately getting better man

are you working with a punty in addition to a blowtube?

2 handed that is

i refused to work like that till a few months ago

and now my shits turnin illmatic

if im ever out in the area

you know were gonna be torchin

Hey crip hows the Knight burner treating you? Have you tried using your stick stack tool on the Knight? I was thinking about taking some clear rod lay side by side grab them up with a chip bag clip and fume one side gold and one side silver then roll them around randomly and fume again them do a stick stack of clear in clear to get the hand of heating and pulling down such a mass. that way its cheap practice. then when I start getting good results switch to a slightly smaller color stack. Also wondering about a web site for my flooring biz not real soon but I think your the man to talk to and I would much rather have you take care of it so I don't have too!

And tim-e the only time Crips got two hands on anything its probably glass,tits, or his own nuts!

Actually its the old sargent but its good I like, no stick stack tool yet, jsut a half an old bowl push on a stick hehehe,

that sounds like a lota work, but ill have some more tube soon and be able to try some stacks..

as for now heres some crap from last week, and last night i made these 6 reversal lenses now i just need to figure out what to do with em,

well see later Im gona try a few pieces tonight, but im looking for ideas too...

and i always got 2 hands on everything its the feet that just sit around and collect dust..

http://cripskillz.com/pics/gldg/4145.jpg

http://cripskillz.com/pics/gldg/4157.jpg

http://cripskillz.com/pics/gldg/4154.jpg

get em crip Your working your mib hand like yo pimp hand slappin those bitches down. You got a good mib account going or what!

Your blue toobs look neat, put loops on the disks and call it a day, just an idea like.

I made a bunch of similar disks recently to put on the end of tubes, I figured by the time I used gas & time to do the weld I may as well have just made them into pendants, so I did and they go good.

those marbles are dope, how are you doing them?

hehehe weeeeeeee thoes arnt even MiBS, could be but i think there all going to turn into pipes or pipe parts just havnt decided yet, the kiln is warmin up now.....

but i have some blue black n red tube might try em on the ends n see what happens.

check one page back VED..

Ok so the black came out lookin like straight ASSS last night so i jsut quit wile i was ahead, i still got 5 more tries..

but that black jsut got nasty lookin and cracked the mouth piece when i was almost done so lost an inch or more.. i jsut couldnt get the right flame now matter what i tried it was just over..

ill try blue tonight..

http://cripskillz.com/pics/gldg/4163.jpg

As long as I can hear my oxy coming out of the center fire the black has stayed nice and shiny for me. Nice caps, those are cool! Quick and easy with the premade rod.