http://images.tapatalk-cdn.com/16/01...281944938e.jpg
Sent from my iPhone using Tapatalk
Printable View
http://images.tapatalk-cdn.com/16/01...281944938e.jpg
Sent from my iPhone using Tapatalk
The first (and so far only) piece I've made in 2016...
http://www.cosmoglassworks.com/image...y/010216_1.jpg
http://www.cosmoglassworks.com/image...y/010216_2.jpg
My first one of the year. I took a little break so I gotta get back my motivation. Next one will be better.
http://i105.photobucket.com/albums/m...psj6rxohk1.jpg
This is a little more interesting to look at. Just finished #2 of 2016. Air Jordan cthulhu rig.
http://i105.photobucket.com/albums/m...pstvnzhlub.png
http://i105.photobucket.com/albums/m...psqqpnqwoc.jpg
http://i105.photobucket.com/albums/m...psujvt90s9.png
That piece is sick Dan
This is correct. The stem/perc should be open, your can closed. After closing the bottom of the can you will then pop open the hole to weld your joint at an appropriate time.Quote:
Originally Posted by Oneiros
http://images.tapatalk-cdn.com/16/01...77fa082416.jpg
Sent from my iPhone using Tapatalk
sorry I haven't posted in a few days, but A.I. pretty much cleared everything up. The hole in the shoulder for the downstem should be popped after attaching the downstem to the inside of the can. I gotta do a second attempt the correct way with the downstem tech. I have a bunch of half blood coiled up into two pods I might make a lil rig with. For some reason I'm way more nervous about this one than the one I did with that import tubing.
did this pendant the other night.
http://i410.photobucket.com/albums/p...ps2uqlzpi5.jpg
i have something too, downstem dropdown is missing on one have to make that tomorrow
Attachment 80797
How does one make that pattern, if you don't mind me asking? I tried what I thought it was and it didn't come out anything like that.Quote:
Originally Posted by HerbChambers
Here's a recent pendant I made from some rainbow retti section I had left.
http://i1177.photobucket.com/albums/...ps5tpepfbp.jpg
http://i1177.photobucket.com/albums/...psermxonlc.jpg
Hey look it's nomads mug fresh out the kiln . Must have been a low fire anneal
I'd post mine but it's all janky and checked...Quote:
Originally Posted by jr23
that's about the only thing different about that post :)Quote:
Originally Posted by jr23
oh snap!!
9 inch tall mini tube, made with irrid and purple amethyst. 14mm female joint, and a 3 hole fixed downstem.http://i410.photobucket.com/albums/p...pskjgxyuav.jpg
6 inch tall haterade and blue dream jammer. 14mm female, 5 hole diffy fixed to the bottom of the can. Unfortunately got the neck too hot before I bent it and the can cracked while doing the downstem, I healed it but theres a massive scar on the other side.
http://i410.photobucket.com/albums/p...psg3yyrq60.jpg
sorry about your cracking issues but regardless, when bending a neck, use a nice soft bushy flame, try not to heat the center much, and bend slowly, after you let it cool. you will get a nice arc that way.
Trying a few different designs trying to decide on what works the best for me to produce in a timely manner.
http://i105.photobucket.com/albums/m...psyogjgc2e.png
You do things in a timely manner? :D
Thanks man, I noticed it was too hot mid way through the bend. definitely panicked a little bit and just went for it, which was definitely a mistake. I plan on doing alot more, really trying to get these down. Im half way through another right now!Quote:
Originally Posted by hashmasta-kut
This is really cool, I'd buy one!Quote:
Originally Posted by Dan Kooper
Sent from my SM-G900W8 using Tapatalk
This ones half blood. stands 5 inches tall and 14mm female joint. It has 6 small holes in three groups of two around the perc. No cracks on this one but the necks got some wonk to it. fairly happy with the no cracks but I need some more clear to practice with...http://i410.photobucket.com/albums/p...pspdkghc6y.jpg
https://uploads.tapatalk-cdn.com/201...38c2fdb2d4.jpg
Making more glass today. But I have to go to the doctor tomorrow . I think I have a kidney infection. Just my luck.. I really want to get a lot done here. But something is wrong with my gut and I had to make an appointment .
https://uploads.tapatalk-cdn.com/201...d890e657a0.jpg
https://uploads.tapatalk-cdn.com/201...64c020fb83.jpg
Sent from my iPhone using Tapatalk
next time you get your monthly (aka, period), drink a lot of cranberry juice. for reals ;)
I will try that. But I really don't know what it is. I am not a doctor.
Sent from my iPhone using Tapatalk
I have been not feeling well since Christmas .
Sent from my iPhone using Tapatalk
it's a joke bro.
be you female or male, cranberry juice is excellent for your urinary tract.
I took a uti test and I was negative. But I think between the bladder and the kidney is different test. The other tests are over the counter.
Sent from my iPhone using Tapatalk
Get better soon!I have been sick for weeks now,hating not torching!
Attachment 80865 weekly grind
Doctor is hard to reach if you blow glass all day. They can't make an appointment over the voice mail I guess. I have to wait for the phone all day.
Sent from my iPhone using Tapatalk
cell phone?
I can not answer it most of the time. I have both hands occupied most of the time.
Sent from my iPhone using Tapatalk
chaos fume tube. just over 7 inches tall, 4 hole diffy and 14mm female.
http://i410.photobucket.com/albums/p...pszfrwi3df.jpg
kiln. garage. pick up phone.
man you really need a blog.
Most of the time I have a handle on one end and a blow tube on the other and I am spinning the glass. Plus background music oxy cons and fan are no good
Sent from my iPhone using Tapatalk
Email is best. You can answer it a few times a day.
I was checking my phone a lot today . So I hardly got anything done.
But it is cold. Hard to melt all the color in without is getting too cold also...
Sent from my iPhone using Tapatalk
lol. yeah reaching over to peek at your phone screen is so counter productive.
really dude.....there seems to be a problem for every solution.