th lighter says
a: can i stroke your pussy?
b: sure , as long as you hold the cat!
idk if i translated it right, but i think it makes sense
hehe
Printable View
th lighter says
a: can i stroke your pussy?
b: sure , as long as you hold the cat!
idk if i translated it right, but i think it makes sense
hehe
lol damn german lighters have a better sence of humor then american lighters lol our lighters only say flick my bick
stuff from yesterday
my first try at marbles
spiral, implosion(didnt work out right) ,vortex)
http://img227.imageshack.us/img227/3...plomarble1.jpg
http://img707.imageshack.us/img707/9...texmarble1.jpg
http://img171.imageshack.us/img171/8...texmarble2.jpg
http://img294.imageshack.us/img294/6601/marbles1.jpg
http://img294.imageshack.us/img294/4710/spiral1.jpg
http://img12.imageshack.us/img12/5848/spiral2c.jpg
the fucking hot finger marble grabbers made dents in them so i have some eastereggs now grrrrr, gotta get me a marble graphite mold quick haha
http://img716.imageshack.us/img716/4683/loldome3.jpg
oil dome i tried for a friend( the white bubbled a bit)
dish with implosion and a dabber with a spiral an some dichroic
http://img202.imageshack.us/img202/6...anddabber1.jpg
http://img694.imageshack.us/img694/9...anddabber2.jpg
and a pendant
http://img694.imageshack.us/img694/7085/wigpendant1.jpg
kind regards
some tips on working with the dichro would be cool often it gets white and doesnt reflect anything at all.....too hot?
with dichro u have to use a really oxydizing flame or it will burn out, also, if it is too close to the surface it is super easy to burn out.
Cool marbles!
hi here are a few new things i made the last days
i have to give a big THANK YOU to hippi who helped me a lot with the wig wag thingy
http://img693.imageshack.us/img693/6905/wigwag2.th.jpg
http://img440.imageshack.us/img440/4403/wigwag3.th.jpg
http://img716.imageshack.us/img716/7...enpilz1.th.jpg
http://img682.imageshack.us/img682/3...endantq.th.jpg
http://img443.imageshack.us/img443/9...pendant.th.jpg
http://img291.imageshack.us/img291/1...itimplo.th.jpg
http://img443.imageshack.us/img443/8048/wigwag4.th.jpg
http://img534.imageshack.us/img534/1630/wigwag32.th.jpg
http://img534.imageshack.us/img534/2...pendant.th.jpg
http://img691.imageshack.us/img691/8...endant1.th.jpg
http://img146.imageshack.us/img146/5...endant2.th.jpg
http://img716.imageshack.us/img716/8921/wigwag5.th.jpg
http://img443.imageshack.us/img443/518/wigwag52.th.jpg
http://img717.imageshack.us/img717/4...erbowl1.th.jpg
http://img260.imageshack.us/img260/7...erbowl2.th.jpg
http://img153.imageshack.us/img153/7...erbowl3.th.jpg
http://img153.imageshack.us/img153/1...erbowl4.th.jpg
http://img59.imageshack.us/img59/504...erbowl5.th.jpg
http://img444.imageshack.us/img444/6...erbowl6.th.jpg
that Amanita Muscaria is sweet , was it a push or what ?
hi the shroom, man i had to google that haha
i pushed the stem in then added white then red then dots of white then encased in clear
-peace- frank
slide show a buddy did for me
i tried some wig wags tell me what you think and this window thing also
how the hell do i get the ends of the wigwags termination?? clean?? the color always gets too thin so its translucent
http://www.vimeo.com/10487679
kind regards frank
When Your making your 'Fiesta' focus on making the end as perfect as you can then switch it onto another punty to clean the other termination. Ive been struggling dooing this on tube recently, its all about practice and determination to get either end as 'perfect' as you can.
When im pulling wigwags(fiestas) i melt in and stretch all of the glass evenly, it makes the wig's tighter and gives a nicer finished effect.
Ive found that Im having more sucess stretching it with a small tweaser letting it cool then snapping off where I can see no clear.
Studio Looks daymn tight man, I wish my space was as nice.
Looking good man! Nice Set UP!
its my garage, kinda cold but i have a propane heater
from the weekend
struggling getting clean terminations
http://img291.imageshack.us/img291/5...iontube.th.jpg
http://img149.imageshack.us/img149/1...penfoto.th.jpg
http://img337.imageshack.us/img337/7...rewiggy.th.jpg
http://img42.imageshack.us/img42/4327/silverwig.th.jpg
http://img651.imageshack.us/img651/4...ionfrit.th.jpg
http://img714.imageshack.us/img714/370/window1x.th.jpg
http://img651.imageshack.us/img651/4...owwiggy.th.jpg
http://img6.imageshack.us/img6/7945/bluewiggy.th.jpg
http://img6.imageshack.us/img6/5773/spirale2.th.jpg
http://img694.imageshack.us/img694/7...pwiggy1.th.jpg
http://img695.imageshack.us/img695/6...plosion.th.jpg
http://img32.imageshack.us/img32/307...plosion.th.jpg
looking pretty nice If you ask me, I do some wigs on a colour base rod rather than laying it on clear, especially when im windowing the work or adding a clear lens.
When my customers are paying a healthy price for my pendants I like to give them some decent value for money.
hi the seventh from the top is based on a white rod
the window thing.....
do you make a windowed wiggy on a tube or on a rod?
i made a poor one on a tube and inserted a spiral , in the 6th picture you can see it
still need to practice the terminations
peace frank
can somreone help me with the wig wags?
how do i get the whole wiggy on the frontside of the pendant?
the design always goes around the edge to the backside
i vondensed the cane completely to a ball but when i mash it half or a fourth of the wiggy is on the back
kind regards
Windows are done on Tube, there's a thread here somewhere :D
there's also a thread on wigwags & fiestas.
I angle my rod downwards work elbow up then the design condenses down todards the center so when ya mash it the terminations are in the center then spread out to the edges!
Keep playing man!
Chris
point the flame at the shoulder of the design and work it around the front with a few marverings too.Quote:
Originally Posted by steak351
like on the thread of a tire , like implosions
i get the idea to condense the design down towards the center
thanks
my sister said they are not exactly the same, but very similar. one is a shrinking, whereas the other you are just bringing the image down to the end. it seems they are almost the same to me, but i think the flame angle is different, similar effect happens..