...
No calling names guys.
Also, if you admit you're not an expert and don't really know what you're talking about, please stop giving advice on the safe operation and maintenance of oxygen equipment.
Printable View
...
No calling names guys.
Also, if you admit you're not an expert and don't really know what you're talking about, please stop giving advice on the safe operation and maintenance of oxygen equipment.
Right... my homefill has now stopped filling and is making the constant "knock knock knock" while on.
I have a new bearing, but what is the best/safest meathod for removing AND replacing the bearing on the crank shaft without damaging anything?
Many thanks
Tearing into a dead homefill i haven't looked at in a couple years and I forgot 99% of what I used to know, so i came here to bump this after 9 years or so.
https://youtu.be/-Fq8TwAIRFM?si=9u2i9ff9MhAoLZOI
This is good info to add to this old thread, machinist dude in Oregon that makes the nqalha and made a bunch of coldworking stuff for Marcel.