Wow!!!Thanks for the link, that is unreal!!!Quote:
Originally Posted by Banditt
Printable View
Wow!!!Thanks for the link, that is unreal!!!Quote:
Originally Posted by Banditt
Man do you know the hardwork that goes into making milli? I bought an awesome Illuminati tri-force from Simian and love it. His work is amazing and some of the best I have seen. Almost everything he has posted I wanted to get but unfortunately funds only allow so much milli in my collection.Quote:
Originally Posted by Jackass Glass
By saying "I still haven't seen anything that I didn't think looked cheesy", you are dissing this man and practically saying his work looks like crap. Think before you speak or type in this situation. (Though Simian can vouche for me that I do not read before I type, :dieslaugh)
#67 Geometric Trapazoid Pyramid
Attachment 85021
Part of a larger project
Man. Those look nice. I want to see the bigger piece they are a part of....
Got a day or so of cold work before I can re assemble them. :)Quote:
Originally Posted by Cosmo
Progress shot of phase 2 on the new geometric project
Attachment 85057
For what it's worth, I didn't read it that way at all.Quote:
Originally Posted by Nuka Glass
It sounds like he is talking about the application of a milli, not the milli itself. I think I know what he is talking about, as many times I have seen milli used on a piece, it looks like it was stuck on as an afterthought.
#68 Caution! Baby on Board!
Attachment 85513
Attachment 85514
Well after months of health issues and neighbor drama involving unprovoked threats of murder and assault directed at me and my family I am finally back at it.
I hope the neighbor BS is over for you. That kind of crap can be devastating to your whole family.Quote:
Originally Posted by Simian
I have a idea (Probably crappy and old) but would love to buy some of a middle fingered hand.
:poke:
Thanks man, quieted down a bit but still an issue. It is going to be resolved for sure though.Quote:
Originally Posted by Ray
Jerry Kelly did a middle finger hand image a while back.
#69 molon labe
Attachment 85573
#70 Eye Cane
Attachment 85658
I'd like #8
#71 and 72, components of a much larger project
Attachment 85794
#73 710 v2
Attachment 85823
Technically this is #74 but this was an experimental pull to figure out proportions, symmetry, and spacing so I can put some more natural detail into a significantly more complex leaf component. So v1 pot leaf. V2 should be significantly more on point. This 8 component build was difficult to not get air in since all components radiate from a center connecting point.
Attachment 86005
Still came out pretty good dude.
You could get better detail with five finger leaf instead of seven. Also the leaves don't meet in the "center", proportionately more like 2/3 down rather than 1/2 down, just to be technically proper.
I will call dibs on a couple sticks of next leaf pull.
#75 Radioactive V2
Attachment 86271
#76 Green Bay Packers V3
Attachment 86272
Attachment 86270
Super clean! What green did you use on the packers?
Lumpy that is Glasstronics Green.
#77 eyes, #78 Skull V2
Attachment 86444
#79 Yin Yang
Attachment 86445
How much? I use a little skull and ying-yang sometimes.
The eye will be $3 a gram, Skull $4 a gram, Yin Yang $5 a gram. I will have DIBs sheets up this week on IG and FB.Quote:
Originally Posted by Nomad
N B 4 the lowballs from Nomad, LOLOLOLOLOLQuote:
Originally Posted by Simian
Awesome images Simian! Still got some colorado cane sitting around but might need to grab some of the eye balls or radioactive if you have any left. I'll PM ya!
I will take 3 grams of both. But I can keep an eye on Facebook too.
It's up to you? I need a 1 inch piece of 7 mm rod of each.
I get 10 out of each I'll be happy. Not making that much money.
But I can get $5 plus supplies for each spoon this way too.
I low ball it because I don't get paid for the marble really. I just sell twice as many spoons per order.
You did a hatchet man right?I am pretty sure it was you,if so and you have some I needs some.Good price on the milli too!!
Dibs sheet for the eye will be up in about an hour. Skull and Yin Yang will be up later tonight and tomorrow. What is on the sheet is all that is available from the eye pull.
LRG, I did a wheelchair hatchet man but I no longer have any.
Just bought 20 grams of two different kinds of peace signs. One direct from milli maker and the other one from abr. The milli maker is out of rainbow peace signs now. They were really popular if you want to make anything. He sold me a lot of plain peace signs before also. ABR gets there peace signs in and out of stock from time to time also. It is a big seller for me.
But seriously send me a paypal request for $28 plus priority mail shipping for the 6 grams and I will try it out. I could use some different stuff in the mix.
The DIBs sheet will be up on my FB page and IG when available. ABR also pays milli makers $1-2 a gram for their work so I do not sell to them. Feel free to DIBs what you like on the sheets as they come up. I have tons of regulars so I make sure they all have a fair chance at getting what they want since each pull is limited. If you order from multiple sheets I always combine shipping to save ya money.Quote:
Originally Posted by Nomad
I could see that. I don't feel bad asking for my discount then too.
Facebook looks like a cool thing. I will look out but I have a lot going on so I might miss it.
I got milli for $2 a gram but I had to buy $100 worth of it. It was the plain peace sign. I used it for a long time. I actually used this one guys peace signs for over a year now but he is not selling them anymore I guess. Good thing ABR has a peace sign also.
Skulls are really popular too. I use ying-yangs a lot. I can get them at a lot of places. But they look cool in the mix.
Ok man. I specifically did the Yin Yang for the challenge of the circular symmetry. I have just over 100 other image ideas that will happen way before a peace sign. But who knows, maybe one day I will revisit a peace sign.
If you do a hatchet man I will definitely pick that up. But I have some Ying yangs, skulls and the tri-force to play with for now. Have yet to use any.
Sent from my SM-G935T using Tapatalk
+1 for hatch man,I have had so many people ask me for that.
I did one a while back that was the hatchet man in the wheel chair. lol. It sold pretty well. I guess if I knew I would sell the majority of it I would do one...obviously given that it is clean. Not sure that I have enough of you guys to buy. I wish there was a way to gauge that kind of interest instead of just winging it.Quote:
Originally Posted by Nuka Glass
possible to do a preorder dibs sheet?Quote:
Originally Posted by Simian
...
Prob not doing hatchet man again guys. Way to many other irons in the fire.