What's really funny Trevor, is that I haven't used that account for probably close to a year. Yet the user name Barry-Allen still rings in your head lol.
I'm a fucking God!!!!
Printable View
What's really funny Trevor, is that I haven't used that account for probably close to a year. Yet the user name Barry-Allen still rings in your head lol.
I'm a fucking God!!!!
You are a dork
Thanks for the kind words and support guys! ive got soooo many sections of lined tubed wigged out that i may have to just make another :)
That's God of dork to u ;)
Attachment 91743
Attachment 91742
Hope all is well with the o.p.
Didn't I combine those two accounts? If not I should, oops.
First time a minitube came.out this clean for me. Gold and silver. What would you guys estimate the price? Is 75-80$ asking too much?https://uploads.tapatalk-cdn.com/201...339988459d.jpg
Sent from my Pixel 2 using Tapatalk
Fume cane twist marble
Flower compression marble
In the works. Attachment 91902
Looks great!
came up with this design last night, pretty happy with it. Do you guys think 30$ retail is a realistic price point?
Attachment 92021
Any input on the design would be appreciated.
Attachment 92022 pocket jammers
thats beautifulQuote:
Originally Posted by ibiza
Year and a half in how am I looking so far
First time working with simax guess I need a lot less fume than Pyrex ha ha https://uploads.tapatalk-cdn.com/201...6bbb44a1fd.jpg
Sent from my Pixel 2 using Tapatalk
I dig it. If you're open to constructive criticism here's a tip. Make sure the glass is super hot before you attach things. The seal on your attachment has a lot of stress from being put on too cold. And if you get a weird spot, take a hand torch to it so you can get it super hot. :)
https://uploads.tapatalk-cdn.com/201...ed9a32e5bf.jpg I haven't posted in years but this is what I'm up to what do you think
Sent from my iPhone using Tapatalk
I think its bad ass.
Pretty cool!
https://uploads.tapatalk-cdn.com/201...05937bb75f.jpghttps://uploads.tapatalk-cdn.com/201...39b23b77da.jpghttps://uploads.tapatalk-cdn.com/201...9745eab502.jpgfresh out of the kiln egg I'm having fun with these hope you enjoy
Sent from my iPhone using Tapatalk
https://uploads.tapatalk-cdn.com/201...4e4f937782.jpgforgot this one
Sent from my iPhone using Tapatalk
I love the color on that. What is it?
The last one is blue Stardust over blue blizzard over clear it takes all three layers to make it look like that in bright light it's sparkles white and silver specs
Attachment 92229 Attachment 92230
Made these yesterday
Attachment 92231
Here’s what all those pipes look like, I guess the first pic doesn’t show any detail.
Nice W&W. Sup with a lesson :)
I can live stream one on ig for ya. Hm... maybe a w&r photo tutorial thread, that could be fun. The short story is I get as many wraps, as close together as possible(without touching) than rake with 4mm again, as close as possible. This one is all raked the same direction. I’ve been able to control the pattern better that way recently. Although it means I probably need to work on my back and forth takes!
Nice color fade for sure. I'm a sucker for fume :)
Here would be awesome. I don't do IG.
I’ll take a bunch of pics tonight I’m gonna soon another few up
My 2nd attempt at a two piece sherlock, my 1st attempt was a total fail. I pushed the bowl after i tagged the two sections, bridged & sealed together. Would it be better to push the bowl before I bridge & seal the two sections together? I've seen it done both ways, would love to hear which way you guys prefer & why. Thanks.
Attachment 92253
I push my bowl while they are separate components
That is how my buddy does it too, he said. I will give it a try that way then next time, guess I was just worried about having a hole already when I go to do the seal & have to puff in some air. Do you need to plug the hole off or if its small enough, then it shouldn't even be an issue? Also, at what stage do you end up popping the carb hole? I tried leaving you Rep, but I must spread the love first, thanks!Quote:
Originally Posted by Mute
You will be fine having your bowl hole in there, it seems like I end up covering the hole with my reamer but it’s not a must. I usually pop my carb after I pull the bridge off. I feel like I get a more centered bowl if I push it before I connect the sections, but a ton of people do it with great success both ways!
i think if you push the bowl in the can first it is easier.
you can spin on axis and heat an even band easier than you can once you are attached and off axis.
also if you are off axis and heating up for the push, the glass can start to cave in from gravity.
when you are on axis you are sideways and still rotating so you can get the glass more fluid without distorting the shape.
Attachment 92254 Taught myself a trick!
What trick is that?Quote:
Originally Posted by Misfitman
its a "fold over" take a blank, fume, line, twist the whole thing up, than heat small sections and fold the tube in on itself. than blow it back out into a blank.
ive been trying to get it down for a while and had some breakthroughs last night haha
Looks awesome misfit! I'd say you nailed it honestly.
On the note of sherlocks, I always push my bowl after. I like having the air preasure of a closed system, thats just me and I'm no pro yet.
Ahhh I see. I only mentioned it because it looked to be the same tech as the previous spoons.Quote:
Originally Posted by Misfitman
Looks nice
Attachment 92299
I made this last night, I looked at some of the sidecars made by some og’s today and boy i got a long way to go �� I’m happy with it though!