Attachment 93056Attachment 93057Attachment 93058
Printable View
+1 ^
Another little jammer from the other night in Massachusetts.
This one is mostly new satin aphrodisia that strikes more red than the standard version. White satin, non dense glopal , really tealy, eclipse , and illuminati. The bridges are experimental hydro. I shrunk the top of the stem and tipped that rear section back at a angle. Slowly getting to the proportions I originally wanted for these.
I need better pics. The strike in person is amazing.
Attachment 93087
Attachment 93088
Attachment 93089
Attachment 93090
Attachment 93091
Gorgeous! I love the new colors.
Are you from Mass? My shop is in Fall RiverQuote:
Originally Posted by BoRo
Dope sherlock!
I have been spending half my time in the Springfield area helping heat things up and cool them down.
I'm from upstate ny , close to the vt boarder. (Remember I had 42degrees buy that case of lofty glass?)
Very nice piece. Loving the new colors!
man i totally need something in my collection from you BoRo, one of these days!!!
Oh Ya!! I member!Quote:
Originally Posted by BoRo
Attachment 93120
The Ouroboros.
A collaboration between a brand new newb. Enligtend angles (6 years in) and myself , at Just under 18 years behind a torch.
The design to completion was a true colab. It's built to run a e nail. 18mm to hold it secure. Each hole was designed as a portal, each to a different plane / location. The piece itself it supposed to be everything and nothing so it does not influence the end user in a specific direction. The antenna wings were Built with high nobel metal content for better reception. It has almost every type of "hype" glass minus old work. Built to tame the Dirty Moutain Tiger.
The list of features and design elements is incomplete.
I will get better pics and a description on instagram when I get time tonight.
1/2 " shy of 16"
Attachment 93373
Attachment 93374Attachment 93375Attachment 93376
I know I'm not the only one making glass. Can I get a reply with pictures from your hot kiln? Pretty please? (Yes, YOU)
Edit for a u.v. Screen Shot ......
Attachment 93377
woo thats sweet, anyone know how dan kooper is doin?
Attachment 93378
Beautiful piece BoRo
Love the work Boro. I've been working mostly on prodo for a minute. I'm gonna be taking some pictures to update my catalog though so I'll drop some here soon.
Been working on lot on gentle striking https://uploads.tapatalk-cdn.com/201...5393985e36.jpg
Sent from my Pixel 2 using Tapatalk
ive been trying to stay warm, so havent been putting that much time in.
cant wait till it warms up.
pictures arent working for me, trying to figure out what im doing wrong.
ive tried insert image and manage attachments but it just wont work.
ive tried to resize down to 29.7 kb but it still wont upload.
That is beautiful alelexi! I could stare at that all night. Here's a spoon i just got out, nothing special but the first time i've gotten good results with amber purple. https://uploads.tapatalk-cdn.com/201...5068408e09.jpg
Sent from my Z981 using Tapatalk
Frit? I had trouble getting colors out of AP in ISO, I end up with piss yellow last time I tried.Quote:
Originally Posted by Roadrunner11
see the "rough" texture on the inside?
that could cause cracking issues if the frit isnt melted in all the way.
blow it out and condense it and you should be able to get it to smooth out more.
ya small frit snoop. i've tried a few times too and gotten a hazy color. hafta get it hotter i think. thanks shattered i've had a harder time with mouthpiece end bc i start to lose control of the blowtube connection. using 10mm
Sent from my Z981 using Tapatalk
Second phantom flower attempt Those are fun https://uploads.tapatalk-cdn.com/201...d28599fa78.jpg
Sent from my Z981 using Tapatalk
it takes a little longer, but you may want to try shaping the end thats opposite the blowtube into the mouthpiece,
then pop a hole and mount a blowtube to that finished end. then finish whatever else needs to be done.
just a different way to go about it and definitely not the fastest.
Not sure if this post will work because I can't get picture uploading to work. But this is the kind of stuff I've been making lately.
https://imgur.com/a/N0bZvdT
wow thats fucking gorgeous i love the natural look
Sent from my Z981 using Tapatalk
Last one for me for a bit until i get better. You guys are amazing https://uploads.tapatalk-cdn.com/201...fc8a51e899.jpg
Sent from my Z981 using Tapatalk
Looking good, Roadrunner!
Off topic: How is it you are able to post pictures?
I just have a cheap phone. When i hit reply in Tapatalk it says write comment up top and Photos below that
Sent from my Z981 using Tapatalk
"Changa"
Features UV-reactive DMT molecule + harmine, harmaline, and tetrahydroharmine molecules, UV reactive water chamber, UV-reactive accents throughout, opal joint plug, 14mm joint for interchangeable attachments for herbs/vapor chamber (works with GVG vapor stone), 19mm joint for interchangeable mouthpiece + hookah attachment.
https://i.imgur.com/3ton0x4.jpg
https://i.imgur.com/cI2cuZd.jpg
https://i.imgur.com/cGgHqX6.jpg
https://i.imgur.com/dniUDUP.jpg
https://i.imgur.com/HOJ0v3c.jpg
https://i.imgur.com/ghSD1Q4.jpg
https://i.imgur.com/1KsmY3f.jpg
https://i.imgur.com/ehdh5tB.jpg
https://i.imgur.com/2wcp4FJ.jpg
I don't mean to be the Holy shit guy but Holy shit man thats intense
Sent from my Z981 using Tapatalk
Awesome work, and that feels like an understatement!
I sd i wouldn't post here for awhile until i got better. I lied. What do you guys call this just a cap? https://uploads.tapatalk-cdn.com/201...1e03aa4985.jpg
Sent from my Z981 using Tapatalk
Here is a recent set I did custom for a seed company in Oregon.
https://www.instagram.com/p/BueUVgtH...on_share_sheet
Edit: Sorry about the link, I tried to actually post the pictures but can't seem to make that happen at the moment.
wow that is beautiful work. ur talented
Sent from my Z981 using Tapatalk
"Shrooms"
Features a psilocybin and baeocystin molecule, mushroom feet, mushroom perc, mushroom mouthpiece, mushroom bowl and opal mushroom plug.
https://i.imgur.com/x8UvMWh.jpg
https://i.imgur.com/Qqi3VOa.jpg
https://i.imgur.com/STJxEhL.jpg
https://i.imgur.com/LCR4KcT.jpg
Been having some fun latelyhttps://uploads.tapatalk-cdn.com/201...0851fe3316.jpghttps://uploads.tapatalk-cdn.com/201...d5b09570cd.jpghttps://uploads.tapatalk-cdn.com/201...e6bdafbbd6.jpg
Sent from my Pixel 2 using Tapatalk
Nice pendants!!
Onerios needs a lap wheel asap!
I will see if I can post some action from the shop later. Still stuck in eugene, Im in heaven.
Oh man, that would be so much fun to play with. I just got a mini wet sander set up. Not sure when I'll have some time to play with it, but I figured that could get me started on some lapping/faceting experiments. Just got some belts for it and I'll see where it takes me :)Quote:
Originally Posted by BORO
Some recent things:
"Happy Pill"
Rainbow shotgun featuring an MDMA molecule, opal pill plug, and 10mm dewar joint w/two-hole diffuser.
https://instagram.fphl2-2.fna.fbcdn.....fna.fbcdn.net
https://instagram.fphl2-2.fna.fbcdn.....fna.fbcdn.net
Galactic Nanganator (nitrous cracker :D )
https://i.imgur.com/4K0VhbU.jpg
where's the carb on this thing...:puzzled::dieslaugh