ya the top is htc-1 n the bottom is sm 21
Printable View
ya the top is htc-1 n the bottom is sm 21
Ok so i tried my 3rd bub yesterday, i think i did my first reversal too, and its a few diff sections for practice and wasnt too bad xcept for the crooked bowl 'ERRRRRR" whatever only a waste of a few hours right, and i made the stem bout 1/2" too short, n should have encased teh blue red part cuz i think it looks like asss, but itll still work any ways heres the pics.. .
hell yeah, looks way better than my third attempt. now do 10 more of them.
thx G, 10 MORE puffffff, im gona do somethin else lata not sure yet but its deff gona match more this is hinda like JYD heheh
are you putting the downstem in before or after you weld on the stem? i like to do it before i put the piece together so that i know that it's right (you can always make a new bucket if you have to). also, if you have a slightly uneven push you can make that the front or the back so that it covers the mistake.
it takes a couple tries to get the downstem/bowl push right. you might consider making a half dozen on clear so that you can see your weld well and you/re not wasting work on the ones that don't come out. if you get a good one you can still fume it and use/sell the thing.
i like the reversal section by the mouthpiece. you're very ambitious with your work. it helps you progress quickly to let your reach exceed your grasp. stay at it mang!
basically what i did was have the can section and teh mouth pice on a point and then welded them together b4 i put any holes in it, then i poped the top hole and droped in a stem and that welded in nicley and the hole closed up to perfect with a lil tungstun poke, then pushed the bowl in and straightened the stem, then carb hole, probally not the right order but it seemed right
so this is what i made last night, thought i was gona be stoked but MOFO only stands up on bed or wif water in i was pissed i thought i had it squared up but i guess the top is just a lot heavy!! heheheh
#4
tight balls
crip how are you opening your bowl holes?
already open I jstu pop hole for stem and drop in a slightly flaired stem and weld it up and thickin it and the hole shrinks down then i jsut use the tungston to keep it the right size then kiln it then, heat around and push bowl
i jacked that one up last night i was buzzed up on a late night blow, my weld to the can was all janky tooo, i think nextime if i fuck somethin up ill jsut tear it off and go again to fix it right
duh totally dumb moment on my part. I was going back over your pics and ended up on the last one and didn't even pay attention that it was a bubbler. Posting why impaired is never good.
those are pretty G for the first couple. i made one bubbler when i first started, managed to keep it from cracking too horrible, went to my buddies, packed it up and rested it on the table. just as i was about to grab it and spark i, he put his foot on the edge of the table and it tipped and shattered lol. have you tried blow ins yet? there the best! they use the smallest amount of color and have ill color gradients and shit. im gonna have to try a bubbler again. lol we should have some kinda friendly competition:devil1:
:DMan Nice I/o work progression is looking dope!!! love to see what comes outta other peoples minds!! Bubblers can be tricky i think my biggest problems are the bowl/stem or getting it to stand proper. One thing that helped me when flatting the bottom was to use a carbon rod in the bowl to make sure it was sitting right. Hold for a few seconds and make sure you don't let it sag if it is still hot. As a newb myself i always try to remember only heat up what you need to work and only hot enough to do what you need. Keep it up man and have fun!!!:D:D
thx man, i put it back in the kiln tonight and re flattened teh bottom so it should stand now, i also dotted up a pice after seen hommies cool dot pipes, well see how it turned out tomarrow
Oh also i forgot to mention but another way that i drop the stem on a bub is buy heat shrinking the stem hole before putting it in so it look kind of like a one hitter with a flare. That way your hole is set. it is a diffrent look thou depending on what you like. The only pic i have is not very good so i made a lil sketch with my dope paint skills!!!! lol:D:D:chilling:
I lke to put my drop stem into the can. Cut it off (flame) and pop a hole thru the downstem then push to the right depth...
AHHH I see I seee ill have to try both, they look goood
ok heres the ones i did last night i like the dotted one n the fume looks cooo tooomight have to make some more
someone Delete This Post
tighttttt.
p.s. this is definitely my favorite thread
WeEEEEEEE got the 50x2.5 yesterday and i liked it, but pullin points on it is a bitch, whats teh eaisest way to cut the cups jsut blotube it then open , ill jsut have to practice teh points big tube is harder fo sho
but made my first dichro mib yesterday n put it on teh roller im takin some to the shop in a bit see if he wants to buy em cuz he has janky thin tube rollers that hes sellin for 55$, well seee heres teh pics
looking good, as far as points i wouldnt use them. just flame cut the tube in half, pop a hole in the end of one and attach some 12 mil for a blowtube.
watch them edges on them mibs Crip...look atlittle "acute" to me..otherwise lookin hot ...
its really fun watching your stuff progress. thanks for the inspiration
dude your stuff is looking sick, and its awesome to see how much more awesome you get between posts! its definitely inspiring!
that io bub was so sick, and the colors too!
Thx Jo keep at it you will be right there with me..
Ya Oxy will be here thursday, so I guess I must not do much cuz i got my tanks filled jan 5th and its now almost march dammm, a T and K tank in a month and a half. i need to start burnin at least 2 a month thats gona be my new goal, now tht i got some more glass n all teh time i need,,
i have a half done pice still in the kiln from when i ran out of oxy cant wait to finish it. dont wana jinx it so ill stop talkin bout it now. hehehh
hey crip whatcha got ur oxy set at?
i was rippin thru my oxy an then i found out i had my propane set wayyy too high, at like 20 psi, and then since i turned it down my oxy has lasted me a lil longer.. but maybe somethin still not right? i go thru 1-2 k tanks a week, im gettin maybe like between 20-30 hours out of each? (before was like bewteen 10 and 20) now my propane is at 3 and my oxy is at 20. when i go lower well i cant describe the flame except to say i dont like the flame wit oxy lower than 20.
anyway not tryna jack the thread lol. im excited to see this piece ur talkin bout!
20-30 hours sounds good, i dont actually do it that much i should,
I get out for maybe 10 hrs a week thats why i use so little, hah but my oxy is set at 20-25 and propane is at like 3-5
dude im so impressed. do u focus on just pipes?
im gonna hop into the chat if ur gona be online for a while
Dont be to imperssed im not that good, hehe usually chat in the am hours if anyones in ther
so i took a pic of the pice thats rdy, cant wait to finish it I think it may be my best yet. oxy should be here tomarow
pic is kinda shitty but well get a good one when its done..
dude thats so exciting. whats that design called? the swirly part.. lol and what black is that? mine thin out way hard as a stringer
SICKKKK!! dude those are some clean ass reverals. but why did you remove the blowtube? you plan on adding another section? NICE!
Hell yeah, thats a kick ass piece, cant wait to see it when its finished! :bouncy:
that looks really good crip, terminations are on point.
definetly your best work yet bro. Super nice!
DAM!!! Crip your kickin ass bro. really nice termination. I'm gonna have to step it up. :D
what are you guys talkin about termination is that the joint between the 2 parts all this is, is the mouthpiece and neck still gotta do the rest..
jsut got back from teh propane place tonight is the night its on
well see if this comes out good or not heheheh
it'll come out great crip, your work lately is looking amazing, please keep sharing pics!!
by termination they're referring to the 'ends' of your reversals. the far sides of the wigwagged tubing, make sense? hop on aim bro you know i'm always down to chat glass :)
Very cool read from the beginning till now Crip, your progress is great, lots of good pics to, I love a good picture thread thats maintained regularly.
I've got my popcorn and a seat now so flame on bro.
:bangHead::bangHead:AWWWWWWWWW So I jacked it up doin a ribbon dichro it moved over and touched side of can, n cracked it awwwwwwwwwwwww but anyways heres teh pics maybe i can fix it but i doubt it,
it had a perfect stem n all right length good hole, but i janked it wif the dichro :bangHead::bangHead:
at least ill know for next time what to watch out for..
you can see the crack right on the front in teh midel it goes around to the bent ribbon thats touchin in 2 spots. oh welll :wes:
Nice mon! I feel ya on the cracking issue, got it myself latley :( still a really sweet piece.