I made this one with a 40 mm id shaft collar,when it was on my delta elite I had a high quality 30mm rifle scope ring for the clamp.

If you feel like making one.

Ryan

Sorry to jump into this for no reason other than to try to get ahold of someone-


MIKE AURELIUS _PLEASE CONTACT ME!!!!!


Ryan C

I went from Delta to Delta Mag also, get the Delta.
it has a higher resale price so getting the mag willl be cheaper later on.
And the Delta is better on oxy and is more versatile, in my opinion....

Yes - 2 , 1500 watt baseboard heaters. I turn it down to 40 when I'm not there.
Then It takes a hour or so to warm up. shop half of the garage is 26x14 with fairly tall ceiling.

It is behind the torch,under the flame so it pushes the nasties up and out the main exhaust vent.

it draws fresh air from outside -through insulated ducting from a roof mounted fan.

I always have the oxygen on slightly when I brush the face or use the wire, good thing to do?

Built the shop last year with electric heat, I keep the thermostat at 60+ when I'm working.

Put my incoming air on the bench to keep the ventilation from pulling the temp down too far.

heres a...

Thats what I have wondered, if iso was the kind of stuff I have now.

http://www.graphitestore.com

I would call them and ask.
anyone ever buy any plates from them?
I'm not sure how soft or smooth their medium extruded plates are but for $23 for a 1/4 inch 12x12 I...

Aura fitted my Oakley frame with some Agw 186, could be the most comfortable pair of shades for a glassblower ever.

I've done stick stacks with no tube under the color , I'm just wondering if you have clear under your rods, I can see that adding alot of glass to the pull.

Have you seen the articles with Marcel in The Flow?

so you secure your rods to a 38 heavy and then melt them to that tube or just hook them to another point and slide it off the 38? I have been using plate glass for tubes lately. Do you think this...

At first i pictured white pvc water pipe.
But your talking about clear braided tube for pop machines and whatever they use it for,so it should be fine.
What type of torch has such a big barb?
-ryan

Did you try to blow it out thin? too thick will make it tough. I watched Brian King at a workshop a couple of years ago make a beauty of a pendent on a bubble blown from 12.7 heavy. You just need the...

Ryan C-27
Midwest
On the torch since 2000.