v marver for trade for color

**jayc** · 10-08-2008, 10:17 AM

Here is a v marver i had made buy a proffesional machinist one of 2.In the picture shows a peice of 35mm heavy wall to show size.brass has been milled to 1/8 inch thickness.bass tube is a little off center when i welded it up didnt tac weld it first but its just off a bit heats pretty heavy so i wont go anywhere.inside tube slides up to double height stands 10 or 11 inches tall when down completly.just looking to trade for some amber purple or blue amber purple.red crayone opaqe blues like lapis also some orange crayons.let me know what you have trying to get about a pound half or pound what evers fair?hope pic shows up good.or at all also im going to throw a wing nut in there i just threw a allen head screw for adjustment for the pics didnt have wing nut.
later.

**jayc** · 10-13-2008, 01:05 PM

Hey i ordered some color so there up for graps.I think what im going to do is stick some rollers on it if interested let me know.

**jr23** · 10-13-2008, 02:58 PM

yep stick a roller on it and I will work something out with you on this one I have lots of shit bro! More than your regular part timer I collect tools and supply's for all my interest so give me a pm and we can trade it up.