-
Re: I think I'm done with this stuff
I've had a pile of emails asking "how much for this and that" so I figured I'd come up with a halfassed price list. Some of the prices may change as I find more stuff or sell something that's in one of the lots.
In total I have 25lbs 11oz of color rods. I found another box of color rods and I just got around to weighing it all up. That's a lot more than I thought I had. Whoever I quoted a price to already you should have bought it then. Some NS some GA, some odds some first, some labeled some not. I firgure I'll let it all go for $500. That just under $20 a pound.
all the frit $40 (I'll get around to weighing this up sooner or later and the price may go up)
all the clear rods and tubes $150
all the graphite and the grabber (marble molds, rods, plates, everything plus the grabber) $150
misc tweezers, mandels, blowhose fittings, rod nippers, tube cutters, tungsten rakes, kevlar gloves $50
silver wire and a bunch of corks (i haven't measured the wire yet but I know it's over 2ft) $20
millis and one opal: 8g Spongebob, 9g Patrick, 14g of misc aliens, Jerry, Scooby, Chef, "TimmEEEE". All for $50 that like $1.60 a gram and an opal for free.
this is the price for now, if you come by and get it. NOT SHIPPED!! If I have to ship it the price will change to reflect the packing materals and shipping charges.
Still looking at trades too. Things I'm interested in: fly fishing, hunting, paddling, mtb, hiking, guns, rustic cabin furnture, old trucks..............
Feel free to make me an offer if you want something.
I'll try and get some new pix posted in the next couple of days. The pix I have on photobucket are old and some of the pieces may be missing and some things my be added. Example, the glasses, I can't them. And the kevlar gloves they're not in the pix but I have them.
Last edited by Stagger Lee; 01-11-2012 at 06:40 PM.
-
Re: I think I'm done with this stuff
I just emailed you back. For some reason your response didn't show up in my inbox
-
Re: I think I'm done with this stuff
Let me know if you're interested in just selling a pound or two of rods, please and thank you.
if not, no worries! I see you hardly want to ship anyways
-
Re: I think I'm done with this stuff
For now I'm hoping someone will man up and buy it all or at least most of it. If nothing happens I'll start breaking things up. Maybe $50 bundles of color.
-
Re: I think I'm done with this stuff
I finally weighed the millis and found an opal in the bag. I posted the weights and price on the above post. I'll snap a few pix and update photobucket tomorrow while the kids are at school. Thanks
The torch and pedal are gone.
The kiln is spoken for, just waiting for him to escape the Congo and come get it.
-
Re: I think I'm done with this stuff
Dude lampers are lazy but shit man u take the cake. Why don't you just give that shit to some kid that wants to learn and be done with it. Mountain will find a good home for it.
-
Re: I think I'm done with this stuff
Why don't you just give that shit to some kid that wants to learn and be done with it
They'd have to play the ol' rusty trombone for that to happen.
Yeah I'm lazy. Selling this stuff $10 here $18 there will take up so much time it would turn into work and I don't want anymore of that. That's the whole reason I quit glass in the first place. It can sit in the shop for all I care. I don't need the money and can work all the overtime I want at work if I need any extra money. I've been away from the glass scene for a few years and I figured someone would have more than $9 to spend on glass equipment but I guess somethings never change
-
Re: I think I'm done with this stuff
Originally Posted by
Stagger Lee
You can't read. Go back and reread my post. I thought I was pretty clear. I don't won't to ship but want to sell to someone near Augusta, GA or Murphy, NC
Ya dude, trust me I can read!! you should have never put this up until you knew what you truly were going to do. Your still pulling shannagins, maybe we should wait for one more price change. Sell it or take it down. God knows you have enough work to keep you busy right?
Last edited by RedToroBoro; 01-12-2012 at 09:55 AM.
Originally Posted by
hashmasta-kut
i love my buttplug on a stick ass well.
-
Re: I think I'm done with this stuff
UHHH whatever "dude" either buy something or don't
Originally Posted by
RedToroBoro
Ya dude, trust me I can read!! you should have never put this up until you knew what you truly were going to do. Your still pulling shannagins, maybe we should wait for one more price change. Sell it or take it down. God knows you have enough work to keep you busy right?
-
Re: I think I'm done with this stuff
JEEZZ! lay off, mr toro boro- big shot!! quit picking on the guy, you can see hes a ways from selling this shit. do you want any of it any how? weren't you just new here having troubles reticently?
When he figures out what he wants to do with it he will re post it here, I'm sure of it. Until then if you want some you will have to drive over there to see him, or it's no dice!!!
-
Re: I think I'm done with this stuff
All the color rods and frit are sold and I'm gonna ship it............. so nanny nanny booboo on you toro boro moro shutupo. I had a few beers at dinner so yeaaalllllllllllllllllllllllllllllllllllllllllllll lllllllll............bubble bubble bubble..........YEAHHHHH ME!
color rods sold
color frit sold
kiln spoken for but still in my shop
-
Re: I think I'm done with this stuff
I'm ready to come trade you for that kiln if that dude drops out
-
Re: I think I'm done with this stuff
I'll let everyone know if he bails but he seems pretty stoked about getting it.
-
Re: I think I'm done with this stuff
All the color and millis or sold. The kiln is still here but should be gone next week. still have all the clear and the tools.
Email me with any offers. getulus@comcast.net I'll ship stuff out as long as it's not some small ass amount, let's just say over $50 and I'll ship. Thanks for all the interest so far.
-
Re: I think I'm done with this stuff
I'm still ready to trade for the kiln if he drops out. Let me know.
-
Re: I think I'm done with this stuff
i ll take that silver wire if you ll mail it please Sir
GTT Mirage ......Slyairbrush.com Check me out for some of the best Airbrushing on the East Coast.
Cars, Bikes, Shirts, (Glass?)
-
Re: I think I'm done with this stuff
what would you want for the clear, graphite, and tools shipped?
-
Re: I think I'm done with this stuff
Kiln is gone
All color is gone
Millies are gone
still have all the tools and clear. i'll ship out any of the tools and misc stuff but really don't want to ship the clear tubes/rods. And please don't ask for me to ship a friggin $2 pair of tweezers to Canada. As always email me getulus@comcast.net
Last edited by Stagger Lee; 01-26-2012 at 03:32 PM.
Similar Threads
-
By pstvn in forum Pics, Galleries, and Websites
Replies: 42
Last Post: 10-14-2013, 04:29 PM
-
By LTD in forum Pics, Galleries, and Websites
Replies: 57
Last Post: 04-11-2011, 03:05 PM
-
By cody in forum Pics, Galleries, and Websites
Replies: 16
Last Post: 08-23-2010, 09:10 PM
-
By J McGhee in forum Glass Art for Sale and Wanted
Replies: 1
Last Post: 07-10-2006, 07:47 PM
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Featured Member's Spotlight!
Bookmarks