That's sick bro! I want that! Just no torch to trade :/
Thank you! I did post it in the glassified once back then.
WTT 2007 Triumph Tiger for Scutt Scarab or comparable annealing kiln AND (EX15 O2 concentrator or Mirage or boro and/or $$). Bluebook is $6500. Stock Photo pictured can supply actual photo if you want. Never wrecked, low miles, always garaged. Located in Eugene, OR.
Last edited by DaveK; 07-28-2013 at 04:51 AM. Reason: Yes
edit; i think your in the right spot. my bad
Last edited by LooseSeal Baller; 07-27-2013 at 07:28 AM.
☢
I want to trade for supplies
Rods, tubes, torches, regulators, hoses, tools, marvers, reamers, grabber, punches, roller, graphite, flash back arrestors, what else u got!
I have a national 6b with htc-3 tip and other stuff for trade.
Is this thread sill alive?
I have a few things available for trade.
2013 spider. Unknown species. Yard trained and guards your home. May bite.
-------------------------------------------------------------------------------------------------------------------------
Taylor 414ce Ovangkol/Spruce Grand Auditorium Acoustic-Electric Guitar Natural
http://www.musiciansfriend.com/guita...lectric-guitar
I have a ton of guitars and this one never gets played, so there is no wear at all.
Dayton massive blower. Approximately 3000 cfm. Is a hazardous location spark resistant blower. The fan was used for about a year. The components and links are listed below.
DAYTON Spark Resistant Blower, 13-1/2-1/2 In
Spark Resistant Blower, Belt Drive, Backward Incline, Less Drive Package, Wheel Dia 13-1/2 In, Bearing Type Ball, Housing Height 27 1/4 In, Housing Width 29 3/8 In, Housing Depth 25 1/2 In, Inlet Dia 14 In, Discharge Height 27 1/4 In, Discharge Width 10 5/8 In, Includes Weatherhood (For External Mounting Only for UL 762) Grainger Item # 1WBW8 Price (ea.) $1,497.00 Mfr. Model # 1WBW8
http://www.grainger.com/Grainger/wwg...rue&sst=subset
----------------------------------------------------------------------------------------
MARATHON MOTORS Hazardous Loc Mtr, Cap Strt, TEFC, 1 HP, T3B
Hazardous Location Motor, Capacitor-Start, Totally Enclosed Fan-Cooled, 1 HP, 1725 Nameplate RPM, 56H NEMA/IEC FrameCW/CCW Rotation, Voltage 115/208-230, Full Load Amps 13.4/6.8-6.7, Phase 1, 60 Hz, Base Mounting, Ball Bearings, Frame Material Rolled Steel, Thermal Protection Auto, Service Factor 1.0, Hazardous Location Class 1 C, D / 2 E, F, G, Max. Ambient Temp. 40 Degrees C, Temp. Code T3B, Shaft Dia. 5/8 In., Shaft Length 1-7/8 In., Overall Length 14-1/16 In., Lead Length 6 In.
Grainger Item # 1TUN3 Price (ea.) $598.50
http://www.grainger.com/Grainger/wwg...rue&sst=subset
-----------------------------------------------------------------------------------------------
V-Belt Pulley, 3.75 OD, 5/8 Bore, Var Pitch
V-Belt Pulley, Variable Pitch Fixed Bore, Bore Dia. 5/8 In., Fits Shaft Dia. 5/8 In., No Bushing Required, Outside Dia. 3.75 In., 1 Groove, 3L Belt Pitch Dia. 2.3 to 3.1 In., 4L, A, or AX Belt Pitch Dia. 2.4 to 3.4 In., 5L, B, or BX Belt Pitch Dia. 2.7-3.7 In., Standard Keyway, Standard Setscrew, Gray Color, Cast Iron Material, For Use With 3L, 4L, A, AX, 5L, B, or BX Type V-belts
Grainger Item # 3X264 Price (ea.) $30.42
http://www.grainger.com/Grainger/wwg...rue&sst=subset
Item 9 exist!
I've got a sprint palm pre with hard case and touchstone charger.
Will trade for glass, millie, or just about anything =)
Doug Harroun
Greymatter Glass
Albuquerque, NM
(505) 884-0318
A̿̐͒ͥ̏̅͋ͤͮ́́̒͢͏̨͙̩̦͔̫̠̲̤ͅ ̑ͨ̎͆͐̉̍̐ͤͮͨ͐̇ͩͦ̏ͣ̚͏̷̶̭̝̠͓̞̱̭̫͙̜̮̫͔̤̱͕͢b̓̓ͭ̿̓ͥ̐̒͂͂ͧ ̡̓͋̐ͥ҉̧̹͎̺̳̩̬̘̯̮̜̼̻͝ͅē̵̹̯̦̟͔͊̓̔͗͊̀͆͗̀ͭͭ̀̇͋͋ͩ̓̓͞͞͞ ̘̰̘͈a̧̹͙͇̫̲̻̳̦̦͛͑͂̌̊́̌̂̅ͤ̿͠ͅų̷̶̡̺̤̳͐̂ͣ̋̀ͅͅt̍̀͋̽͗̚ ̶͎͎̳̤͈̘̞͕̣̲̣̼͙͎̬̪̜͎̯ͤ̃̈́ͬͧ͒͟͞͝͡iͪ̋̌̄̎ͪ́̚҉̶̰͎̣̥͉̙̘̬͝ ͍͈̻̻f̡̟̤̥̝̞̈̋ͧͮ̂ͣͬͨ͆͊̌̇ͨ̚͠͞u̵ͥͦ̑ͧ̆͂͐̊̏̍̋̓͗ͭͫ͆́̃͊͘̕ ̛̱̳͓̠͖̕ḹ̢̧̦̬̲̟̳̉ͯͫ̊̏ͪͫ͝ͅ ̵̺̫͙̗̦̠̯̞̫̪̩͐ͭͮ̏̓͒̏͊͋̚̚͘ͅḧ̨̛̭̼̘ͤͥ̿ͫ̊ͦͧͮͮ̀̓̔͌̉̓̀̀͡ ̺͚e̷̦̤̘̯͎̜͇͚͔̱̙͖ͪ͛ͤͮͬ͆͆̾̾͂̑͆̓͜ȧ̴̋ͨ͂ͣͬ̓̆͐̾̿̐̃̒͊͌́͝ ̷͇̮̙̗͉͍r̵̜̰̣̫͙̦̻̖͕͎̘̲̗̘ͦ̋̑̀̌̎̓ͭ̚͞tͨ̅̇͛ͫͫ̆ͪ̌͋ͩ̉ͯ͊͌̌ ̴̨̢̭͚̳̦͖̻̮̬̣̮̟͓͉̪͈̍ ̷̷̫̬͈͓̞͈̞̬̹̟̯͚̹͇̩̏͋ͬ̍͛̎̑̄̽ͦ̆̔̈́̀͆ͩ̓
.
155 Allen Double Camber Rocker Snowboard with limited edition Union/Capita Collab bindings.
155 Capita Stairmaster
155 Technine Board w/ Technine Bindings
Yamaha Fg-441s
A original xbox bundle and a Halo reach Xbox slim bundle, games, Tony Hawk ride , and Guitar hero guitars
Looking for a Kiln, Glass Rods/Tubes , Millie, Hoses, Regulators, Flashback Arrestors, Foot Pedels, and Tools!
Thanks for looking! =)
“If you don't have a plan, you become part of somebody else's plan.”
I'v got two sets of Leupold Binocs.
http://www.opticsplanet.com/reviews/...inoculars.html These, only in Black. Also a smaller pair of Leopold Olympic backpacking binocs. Im looking for glass, tools, ill trade these plus cash for a kiln, whatcha got?
'92 Kawasaki Vulcan 750 for trade. Doesn't run. Needs the following:
stator needs to be replaced,
Carbs need to be gone through probly,
throttle cable needs replacement
Gas tank works, but has gnarly dent on top, cap is hard to unlock. I have spare tank that could be easily restored.
Thats all it needs though to be a nice bike, has a windshield and leather bags. Most comfortable 750 cruiser I've ridden and Ive ridden every 750 out there.
Im interested in a pair of wrap-style shade 3 phillips new or used, some color and one of firekist's swivels.
I'd trade for up to $300 worth of shade 3's and whatever else ya got. Sick of looking at the bike, it just makes me sad anymore and takes up room.
I have an authentic, flawless, red Coach purse, leather. Purchased brand new for my S/O, and she says its too small for her liking.
Want to trade for a finished piece for my collection.
Would make a nice gift for someone.
If you would like pictures, pm me your phone number and ill text them. Thanks.
Without love in the dream
It will never come true
Damn you thread! LIVE! LIVE I SAY!!!
bump with stuff update.
Still have PS Vita and game, I think I mentioned some computer parts that are gone.
adding an older electric guitar, link for details found here. Would be willing to trade some or all things towards a torch. Preferrably Sargent Welch, but would consider a Red Max or Barracuda.
http://wilmington.craigslist.org/msg/4006381815.html
Also have a Phillips surround sound system, if interested then pm me for details and pics on that.
Last edited by Dubbz; 08-21-2013 at 07:09 PM. Reason: removed part about having a slide fire stock
Is anyone here a drummer? My girlfriend has a badass drumset that she never uses and wants to sell. If anyone is interested, I will have her post the specs on my account, as I don't know shit about it besides that it's a pearl set, not made anymore, in fantastic condition, and cost about $2K new. If anyone wants to know about it, Let me know and I will post a description and pics.
Yes and thank you for looking. I have for trade pr sell one out control 2 1/2 year old with an up sell of one more that's on the way. Please pm with offers or trade. CC's accepted and Paypal being preferred method of payment.
Thank you for your time and interest.
;-)
Bookmarks