-
Cress electric top loader kiln, large kiln
Hey they everybody today I'm putting up for sale or trade this Cress electric in. All the elements fire right up nice and Warm. Only used this for annealing but it's sized right for a crucible. Model number b 23 11
Controller model lt-4k analog
Not sure what the used price is on this guy but shoot me a offer! Local pickup highly preferred could even be delivered in California or Oregon for a price. Could only be shipped freight.
Height is about 36 inches or so and about twenty six inches diameter.
You can hit me up on kik theglasshole
-
Re: Cress electric top loader kiln, large kiln
Not looking for allot on this guy, takes up a ton of space need it gone soon
-
Re: Cress electric top loader kiln, large kiln
Just talked to Cress they said this kiln originally was around 3,000 dollars. Works great I'm looking for like eight hundred
-
Re: Cress electric top loader kiln, large kiln
We had one around here we bounced back and fourth . It's analog correct you could try pottery people that is where we bought ours like that from. I mean it's worth a try if you don't find someone and really need the space
Lampworking the road that never ends, Until your out of gas!
-
Re: Cress electric top loader kiln, large kiln
Damn buddy I got mine at a steal for $100, slight damage to top bricks but nothing that affects the use. I built a digital controller for it and its done a great job! If anyone buys this and wants to convert it to digital let me know, I could build you a controller fairly cheap
-
Re: Cress electric top loader kiln, large kiln
Damn that is a crazy steal! And thanks I may go post it up on a pottery site
-
Re: Cress electric top loader kiln, large kiln
-
Re: Cress electric top loader kiln, large kiln
Alright need this thing gone! Price now 450 all elements work and fire up great
-
Re: Cress electric top loader kiln, large kiln
Come give me two hundred bucks and you can take it, thing is just talking up space
-
Re: Cress electric top loader kiln, large kiln
-
Re: Cress electric top loader kiln, large kiln
How much would shipping to ND run me?
Also. Is it possible to hook up a digital controller to this?
-
Re: Cress electric top loader kiln, large kiln
Originally Posted by
Gahhruuba
How much would shipping to ND run me?
Also. Is it possible to hook up a digital controller to this?
Yes these are easily upgradeable to a digital controller just never had the need for it, I'm guessing shipping would be pretty substantial since it weighs a couple hundred pounds. I will check for you though
-
Re: Cress electric top loader kiln, large kiln
Originally Posted by
Gahhruuba
How much would shipping to ND run me?
Also. Is it possible to hook up a digital controller to this?
Just looked up prices, would be around 300 to freight it to you
-
Re: Cress electric top loader kiln, large kiln
Originally Posted by
Unlmtdglass
Just looked up prices, would be around 300 to freight it to you
And your looking to get 200 out of it?
-
Re: Cress electric top loader kiln, large kiln
Originally Posted by
Gahhruuba
And your looking to get 200 out of it?
Yup that is correct
-
Re: Cress electric top loader kiln, large kiln
Still bigger and less expensive then the one I have picked out.. sad it's a top load though.
Give me a day to think it over?
Will probably go this route anyways.
-
Re: Cress electric top loader kiln, large kiln
Originally Posted by
Gahhruuba
Still bigger and less expensive then the one I have picked out.. sad it's a top load though.
Give me a day to think it over?
Will probably go this route anyways.
Yeah no problem man, wouldn't be too hard to cut a door into the side if you wanted, take your time man no rush
-
Re: Cress electric top loader kiln, large kiln
Originally Posted by
Unlmtdglass
Yeah no problem man, wouldn't be too hard to cut a door into the side if you wanted, take your time man no rush
Right on. Sounds good! Secondly, do you know of any digital controllers that are compatible with it? Tried googling but couldn't find anything
-
Re: Cress electric top loader kiln, large kiln
I'm not sure I found some info when I first f got the kiln but last it now, but on the first page of this, another person said they used a similar kiln and made a controller for it. He also said he would help whoever bought this to get one
-
Re: Cress electric top loader kiln, large kiln
Is that a "airsep" intensity oxy con I see in the back round,? I really like this kiln would you consider a trade for two 5L 10psi oxy cons for your kiln?
Similar Threads
-
By ASGlassy in forum Member's Glassifieds
Replies: 4
Last Post: 04-01-2015, 06:26 AM
-
By Foxy999 in forum Member's Glassifieds
Replies: 0
Last Post: 02-24-2015, 01:32 PM
-
By brian falls in forum Member's Glassifieds
Replies: 0
Last Post: 06-26-2014, 11:33 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Featured Member's Spotlight!
Bookmarks