-
Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
Jen Ken Octagon Kiln, 11x11x9, digital controller, bought brand new for $750 less than 2 years ago. works perfectly, mint condition, looking to go up a few sizes. Asking $675, willing to trade w/ cash on my end for a paragon f130 or larger. Also have a 40mm Herbie (NG), tuned for propane, needs a lil work, asking $1250, willing to trade that too.
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
Trade the Herbie for a Phantom?
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
What work on the herbie is needed . I have a new stash of og moss I could sell a bit and buy it cash pretty quick .
I set back some of my stash to sell for a bench burner. I want a herbie , a grand champion . I want to spend a few months on some different burners .
I know a few people have converted herbies and the resale market is easyer than in the past .
Lampworking the road that never ends, Until your out of gas!
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
I would need some good flame pics maybe even a video sent to my phone so my buddies that can tune can look at it cycle through the knob .
That way I would know where I am at as far as can they walk me though it or is it beyond walk you through it deal and required more shipping before plug and play
Lampworking the road that never ends, Until your out of gas!
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
the Herbie needs a little more tuning, and maybe an internal cleaning or a fuel ball($8.00 from abr). I'll post pics later today. I set it up w/ a red GOK 50mbar pressure reducer(You'll need one, I suggest international ebay, as I'll include all the other adapters) and 40psi oxygen the outer most stage doesn't seal properly causing occasional pops from the outer ring. All the ports are clean, centerfire and 2nd stage are fine, and the torch is in overall decent condition
Last edited by Spencer.Sawdust; 12-17-2015 at 02:08 PM.
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
Pics of the herbie flame, you can see the halo from the 3rd stage
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
Herbie is sold. Kiln available
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
Do you need a bigger kiln to produce more knock off dabbacinos?
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
Why the fuck is every shithead that has a poorly tuned natty herbie saying it is a herbie tuned for propane that "needs work". It is a "fucked with the knobs herbie not tuned for shit I dont know what I was thinking please buy this thing I am unqualified to operate let alone tune herbie".
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
I wonder the same thing needs work is one thing .
But surface mix torches popping and making all kinds of racket is not safe .
I understand a bit of popping and hear herbi es can make noise .
But I have ran a few properly tuned herbies that once lit you could roll the knob from pinpoint to big fluff with no crazy popping and sputtering .
But props for being up front and telling all the issues .
Some don't they just sell these ng herbies as is . Know that they have been proven tune worthy by j Howard.
Lampworking the road that never ends, Until your out of gas!
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
LOL, no those dabbachinoz were given to me to repair, so they'll sit there until I take everything out for target practice
As far as that herbie goes, I just didn't have time to finish it, I'm a pro mechanic, and I know how to work on herbies, I'm finishing a full rebulid and tune on another one, I'll post pics when I get done, it'll be real nice.
And, yes there are way too many people attempting to unload poorly tuned or not tuned or timed NG torches
Last edited by Spencer.Sawdust; 12-21-2015 at 09:36 AM.
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
Originally Posted by
Spencer.Sawdust
Herbie is sold. Kiln available
still have the kiln? and where would it ship from?
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
Nice deal.on that kiln! I got one for more and was analog then I paid another 200+ on kiln controller so who ever gets the kiln will be stoked!!! I make big ass full size aliens with mine
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
Is the kiln still available?
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
-
Re: Jen Ken 11x11x9 digital kiln $675 & 40mm NG Herbie
Is this kiln still available by any chance?
Similar Threads
-
By KayG7 in forum Member's Glassifieds
Replies: 9
Last Post: 12-01-2015, 08:01 AM
-
By Maidaglass in forum Member's Glassifieds
Replies: 12
Last Post: 03-03-2013, 06:38 AM
-
By akmewon in forum Member's Glassifieds
Replies: 9
Last Post: 01-20-2010, 11:51 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Featured Member's Spotlight!
Bookmarks