-
?diy herbie style scissor roller extension?
http://www.arnold-gruppe.de/index.php?id=52&no_cache=1&L=1&tx_arnold_pi1[item]=150186
id like to find scissor arms or parts to build the scissory extension part.
some items that may prove useful:
coat rack
scissor lab stand
random hardware parts
cheap lamp
id love to find an industrial or commercial item that uses these types of scissory things.
id buy premaid rollers like this if they were relatively affordable. herbies are just way too out of my budget,,, i bet theyre smooth as eggs tho.
-
Re: ?diy herbie style scissor roller extension?
the herbie siz roller is bad ass and worth the buy. The roller wheels are super nice.
~FlowerMatt
-
Re: ?diy herbie style scissor roller extension?
I know a guy who has 1 and has used it on large work for at least 15 yrs. Herbie makes some good tools!
Maybe see if Grainger or a local machine shop can help but why reinvent the wheel!
E
-
Re: ?diy herbie style scissor roller extension?
Originally Posted by
nicko0
http://www.arnold-gruppe.de/index.php?id=52&no_cache=1&L=1&tx_arnold_pi1[item]=150186
id like to find scissor arms or parts to build the scissory extension part.
some items that may prove useful:
coat rack
scissor lab stand
random hardware parts
cheap lamp
id love to find an industrial or commercial item that uses these types of scissory things.
id buy premaid rollers like this if they were relatively affordable. herbies are just way too out of my budget,,, i bet theyre smooth as eggs tho.
that does not look too hard to make, 14 pieces of metal all cut same length, & holes drilled same locations, 7 of which have small nuts welded to back, 23 shouldered bolts, so when bolts tightened the shoulder will seat on the nut, & will allow the arms to open & close. sorta free floating & the bolts just hold all in alignment, but not clamping tight.
should be able to find a shaft like for an axle, or small shaft thats machined & would allow free movement up & down. then a bushing to slide up & down axle, with an ear to mount the scissor to? or weld a tab to it. then maybe a hollow shaft, or axle to mount moveable rollers & just need to fabricate a couple locking rings.
-
Re: ?diy herbie style scissor roller extension?
Need some donor parts to make an extension roller. Try the link below.
http://www.ebay.com/sch/i.html?_saca...+mirror&_frs=1
-
Re: ?diy herbie style scissor roller extension?
now we are talking! those mirrors look like just the ticket.
thx losiwells
-
Re: ?diy herbie style scissor roller extension?
Originally Posted by
nicko0
now we are talking! those mirrors look like just the ticket.
thx losiwells
your welcome and thanks for the rep!
-
Re: ?diy herbie style scissor roller extension?
Those mirrors are likely to be made of much thinner metal and may not hold up like the HA stands. That said, any local machinist could probably make those pretty cheap (the scissors).
I have a HA roller set, on a fixed base, no scissors, they're awesome.
Doug Harroun
Greymatter Glass
Albuquerque, NM
(505) 884-0318
A̿̐͒ͥ̏̅͋ͤͮ́́̒͢͏̨͙̩̦͔̫̠̲̤ͅ ̑ͨ̎͆͐̉̍̐ͤͮͨ͐̇ͩͦ̏ͣ̚͏̷̶̭̝̠͓̞̱̭̫͙̜̮̫͔̤̱͕͢b̓̓ͭ̿̓ͥ̐̒͂͂ͧ ̡̓͋̐ͥ҉̧̹͎̺̳̩̬̘̯̮̜̼̻͝ͅē̵̹̯̦̟͔͊̓̔͗͊̀͆͗̀ͭͭ̀̇͋͋ͩ̓̓͞͞͞ ̘̰̘͈a̧̹͙͇̫̲̻̳̦̦͛͑͂̌̊́̌̂̅ͤ̿͠ͅų̷̶̡̺̤̳͐̂ͣ̋̀ͅͅt̍̀͋̽͗̚ ̶͎͎̳̤͈̘̞͕̣̲̣̼͙͎̬̪̜͎̯ͤ̃̈́ͬͧ͒͟͞͝͡iͪ̋̌̄̎ͪ́̚҉̶̰͎̣̥͉̙̘̬͝ ͍͈̻̻f̡̟̤̥̝̞̈̋ͧͮ̂ͣͬͨ͆͊̌̇ͨ̚͠͞u̵ͥͦ̑ͧ̆͂͐̊̏̍̋̓͗ͭͫ͆́̃͊͘̕ ̛̱̳͓̠͖̕ḹ̢̧̦̬̲̟̳̉ͯͫ̊̏ͪͫ͝ͅ ̵̺̫͙̗̦̠̯̞̫̪̩͐ͭͮ̏̓͒̏͊͋̚̚͘ͅḧ̨̛̭̼̘ͤͥ̿ͫ̊ͦͧͮͮ̀̓̔͌̉̓̀̀͡ ̺͚e̷̦̤̘̯͎̜͇͚͔̱̙͖ͪ͛ͤͮͬ͆͆̾̾͂̑͆̓͜ȧ̴̋ͨ͂ͣͬ̓̆͐̾̿̐̃̒͊͌́͝ ̷͇̮̙̗͉͍r̵̜̰̣̫͙̦̻̖͕͎̘̲̗̘ͦ̋̑̀̌̎̓ͭ̚͞tͨ̅̇͛ͫͫ̆ͪ̌͋ͩ̉ͯ͊͌̌ ̴̨̢̭͚̳̦͖̻̮̬̣̮̟͓͉̪͈̍ ̷̷̫̬͈͓̞͈̞̬̹̟̯͚̹͇̩̏͋ͬ̍͛̎̑̄̽ͦ̆̔̈́̀͆ͩ̓
.
-
Re: ?diy herbie style scissor roller extension?
By cheap I'm saying 150-200 it's basic work, but it's still work
Doug Harroun
Greymatter Glass
Albuquerque, NM
(505) 884-0318
A̿̐͒ͥ̏̅͋ͤͮ́́̒͢͏̨͙̩̦͔̫̠̲̤ͅ ̑ͨ̎͆͐̉̍̐ͤͮͨ͐̇ͩͦ̏ͣ̚͏̷̶̭̝̠͓̞̱̭̫͙̜̮̫͔̤̱͕͢b̓̓ͭ̿̓ͥ̐̒͂͂ͧ ̡̓͋̐ͥ҉̧̹͎̺̳̩̬̘̯̮̜̼̻͝ͅē̵̹̯̦̟͔͊̓̔͗͊̀͆͗̀ͭͭ̀̇͋͋ͩ̓̓͞͞͞ ̘̰̘͈a̧̹͙͇̫̲̻̳̦̦͛͑͂̌̊́̌̂̅ͤ̿͠ͅų̷̶̡̺̤̳͐̂ͣ̋̀ͅͅt̍̀͋̽͗̚ ̶͎͎̳̤͈̘̞͕̣̲̣̼͙͎̬̪̜͎̯ͤ̃̈́ͬͧ͒͟͞͝͡iͪ̋̌̄̎ͪ́̚҉̶̰͎̣̥͉̙̘̬͝ ͍͈̻̻f̡̟̤̥̝̞̈̋ͧͮ̂ͣͬͨ͆͊̌̇ͨ̚͠͞u̵ͥͦ̑ͧ̆͂͐̊̏̍̋̓͗ͭͫ͆́̃͊͘̕ ̛̱̳͓̠͖̕ḹ̢̧̦̬̲̟̳̉ͯͫ̊̏ͪͫ͝ͅ ̵̺̫͙̗̦̠̯̞̫̪̩͐ͭͮ̏̓͒̏͊͋̚̚͘ͅḧ̨̛̭̼̘ͤͥ̿ͫ̊ͦͧͮͮ̀̓̔͌̉̓̀̀͡ ̺͚e̷̦̤̘̯͎̜͇͚͔̱̙͖ͪ͛ͤͮͬ͆͆̾̾͂̑͆̓͜ȧ̴̋ͨ͂ͣͬ̓̆͐̾̿̐̃̒͊͌́͝ ̷͇̮̙̗͉͍r̵̜̰̣̫͙̦̻̖͕͎̘̲̗̘ͦ̋̑̀̌̎̓ͭ̚͞tͨ̅̇͛ͫͫ̆ͪ̌͋ͩ̉ͯ͊͌̌ ̴̨̢̭͚̳̦͖̻̮̬̣̮̟͓͉̪͈̍ ̷̷̫̬͈͓̞͈̞̬̹̟̯͚̹͇̩̏͋ͬ̍͛̎̑̄̽ͦ̆̔̈́̀͆ͩ̓
.
Similar Threads
-
By neddowerx in forum Member's Glassifieds
Replies: 0
Last Post: 09-14-2013, 05:03 PM
-
By JBob in forum Member's Glassifieds
Replies: 4
Last Post: 07-04-2013, 10:49 PM
-
By El Puck in forum Member's Glassifieds
Replies: 17
Last Post: 02-26-2011, 08:39 AM
-
By $$$$$$$ in forum Member's Glassifieds
Replies: 4
Last Post: 07-30-2010, 03:50 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Featured Member's Spotlight!
Bookmarks