-
Boro Crucible 101
A buddy is investing in a Darby Dipper and wants my assistance with rod and tube pulls. Trying to search for the basics on running a boro crucible and havent had much luck. Any direction, tips or ticks are greatly appreciated!
-
Re: Boro Crucible 101
I was reading up on it myself a while back. Seems like the Darby Dipper 120V is pretty under powered to melt boro like you would want.
Seems like you better bring a lawn chair and a sleeping bag or a whole hog to roast while you wait.
I was kiln shopping is what triggered my search here an it seems the Darby Dipper is a disappointment. Its a lot to ask of 120v.
http://www.talkglass.com/forum/showt...t=Darby+Dipper
I was looking at an L & L kiln that will do 2,400F for a pottery kiln but decided to build a gas fired pottery kiln for clay work for a whole lot cheaper.
-
Re: Boro Crucible 101
Ya I was kinda worried about that... Thanks for the heads up snoop!
-
Re: Boro Crucible 101
I hope you give it a try though and see how much it will do.
The other day for fun I slumped some boro for fun, I did not see it even start moving till over 1,500 so i soaked it at 1,600 for 30 minutes. I made some flat pipes.
-
Re: Boro Crucible 101
I don't see many people using this as a resource, this guy is a little better known in the soft glass world: http://www.theglassfoundry.com/instructionalvideos.html
-
Re: Boro Crucible 101
Originally Posted by
jkube
thanks Jkube!
-
Re: Boro Crucible 101
Boro crucible 101 dont get a darby dipper. For not all that much more money you can get a much better skutt.
-
Re: Boro Crucible 101
Check out the Glass Hive. I was at there place checking out there new boro furnaces and they look awesome. I have never used there boro furnaces but i have used there kilns and a soft glass furnace and i can say they are worth every penny. and there service rocks.
-
Re: Boro Crucible 101
Originally Posted by
Shapeshifter
Check out the Glass Hive. I was at there place checking out there new boro furnaces and they look awesome. I have never used there boro furnaces but i have used there kilns and a soft glass furnace and i can say they are worth every penny. and there service rocks.
ya ive heard good things about Glass Hive as well
-
Re: Boro Crucible 101
Whatever you do, make sure to get a kiln that was designed where elements surround the crucible pots. Not mentioning names, but some of the multi pot furnaces DO NOT (This creates cold spots and works the elements harder, then, in turn wears out elements quicker).
-
Re: Boro Crucible 101
^^^ listen to whatever this man says. Feel good knows his stuff
-
Re: Boro Crucible 101
Originally Posted by
Feel Good Glass
Whatever you do, make sure to get a kiln that was designed where elements surround the crucible pots. Not mentioning names, but some of the multi pot furnaces DO NOT (This creates cold spots and works the elements harder, then, in turn wears out elements quicker).
planned obsolescence
-
Re: Boro Crucible 101
Originally Posted by
Feel Good Glass
Whatever you do, make sure to get a kiln that was designed where elements surround the crucible pots. Not mentioning names, but some of the multi pot furnaces DO NOT (This creates cold spots and works the elements harder, then, in turn wears out elements quicker).
Thanks Feel Good!
Similar Threads
-
By FatTireBiker in forum Glass Discussion
Replies: 20
Last Post: 09-11-2016, 03:50 PM
-
By jiminyrootkit in forum Glass Discussion
Replies: 14
Last Post: 08-29-2005, 09:19 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Featured Member's Spotlight!
Bookmarks