-
-
Re: Hose Holster -Blowhose Holder-
Nice, I dig it. Might have to order one to try out.
~Misha
-
Re: Hose Holster -Blowhose Holder-
I have 6 that I can make available for a discounted price of $20!. (I can not setup etsy to expire the code after 6 uses.. so.. maybe you luck out and i have to send the official one) There is 1 fitting that is not the "official" fitting. It works just the same, but it's smaller.. so i think it looks a little better, but it does make it a little more difficult to put together and take apart.. which.. is fine when you have one.. but when you assemble a bunch of them.. you sure get a blister fast. =)
Order the holster through ETSY, but use the coupon code GLDGHOLSTER I will ship the different version. this version is setup for 6feet and under. sorry tall folk! Please don't mess about and try to get the 10$ off without getting this holster, i will cancel your order.. unless it's over 100$ or i really like you.. ok.. if i like you AND it's over 100$.. or something. YES, YOU CAN ADD OTHER THINGS TO THE ORDER, BUT YOU GOTTA GET THE HOLSTER =) sorry for the confusion.
e. ross at 4.0 glass just picked up the 1st one this past weekend, and he's given it his approval =) more should be rolling out soon =)
Last edited by Firekist; 02-17-2017 at 08:45 AM.
-
-
Re: Hose Holster -Blowhose Holder-
Thanks again Sky! packing as i type.. well.. almost.. heh
-
Re: Hose Holster -Blowhose Holder-
Originally Posted by
itssteve
Hey jimmi if this deal were to fall through (which I doubt will happen) I'll let my lynx go for a couple cooter pics of your sis. Pm me
-
Re: Hose Holster -Blowhose Holder-
Sweet. I'll likely grab one within the week. They're ugly af, which is a thing to me for some reason, but I have yet to Macgeyver a long term solution and I am super clumsy with my hose. I'll figure out a way to sparkle it or something gawdy, I'm sure. Don't take that offensively, it's not your fault I'm a princess. Just checked out your etsy. I love that Infini-V too. great idea!
Last edited by yinzer; 02-18-2017 at 12:10 PM.
-
Re: Hose Holster -Blowhose Holder-
man.. you should see how ugly the prototypes are Yinz!
I did search and search for different colors of these products.. and it was just not happening.
The orange was not really a "made" decision.. it was the only product I could hold in my hands and decide it would work. (if not orange.. translucent milky white.. which is way grosser to me.)
If you find a source of comparable silicone hose, in different colors, i am ALL for changing up the color scheme. =)
I have tried lower profile splicers (1 of which is on the gldg specials), and they are almost invisible.. but they are MUCH hard to put together, and the consumer would have a real hard time making the adjustments if they need/want to.
sigh. i really tried!
https://www.youtube.com/watch?v=XQAXcdlqAL0
i can only think this might be a starting point for .. dollifying this up a bit..
or https://www.youtube.com/watch?v=JkX2xgoSAJk
if you'd prefer taking advice from a belly dancer
gluck!
Last edited by Firekist; 02-18-2017 at 04:33 PM.
Reason: .. adding a link to a belly dancer. need i say more?
-
Re: Hose Holster -Blowhose Holder-
This looks insanely practical one look at it and all I could think it every time I drop my blow tube or it falls out of my mouth and routinely cursing. Great design
I'm an amateur(warning)
-
Re: Hose Holster -Blowhose Holder-
Bonus points for boobs at the end haha. Kind of what I was thinking. found some faux fur that is heat safe and not all gross chemical wise (which is important to me). I'm really excited to try this. I am literally so clumsy with my blowhose that I often make my life unnecessarily harder by not using it. Really great idea. The kind that makes me want to kick myself in the butt for not thinking of it haha. My blowhose is currently wire wrapped like a 5 year old did it,and can get stabby.
Last edited by yinzer; 02-20-2017 at 06:09 AM.
-
Re: Hose Holster -Blowhose Holder-
Originally Posted by
Firekist
I have 6 that I can make available for a discounted price of $20!. (I can not setup etsy to expire the code after 6 uses.. so.. maybe you luck out and i have to send the official one) There is 1 fitting that is not the "official" fitting. It works just the same, but it's smaller.. so i think it looks a little better, but it does make it a little more difficult to put together and take apart.. which.. is fine when you have one.. but when you assemble a bunch of them.. you sure get a blister fast. =)
Order the holster through ETSY, but use the coupon code GLDGHOLSTER I will ship the different version. this version is setup for 6feet and under. sorry tall folk! Please don't mess about and try to get the 10$ off without getting this holster, i will cancel your order.. unless it's over 100$ or i really like you.. ok.. if i like you AND it's over 100$.. or something. YES, YOU CAN ADD OTHER THINGS TO THE ORDER, BUT YOU GOTTA GET THE HOLSTER =) sorry for the confusion.
e. ross at 4.0 glass just picked up the 1st one this past weekend, and he's given it his approval =) more should be rolling out soon =)
Hey do you still have any of the $20 holsters? I would love to scoop one! Thanks!
-
Re: Hose Holster -Blowhose Holder-
I beleive I have 1 left Jon. I'm going out of town Thursday, and will be closing down my Etsy store while i am gone. I'll post when They are gone, and if I have to send a normal one, I will =)
thanks!
-
Re: Hose Holster -Blowhose Holder-
Originally Posted by
Firekist
I beleive I have 1 left Jon. I'm going out of town Thursday, and will be closing down my Etsy store while i am gone. I'll post when They are gone, and if I have to send a normal one, I will =)
thanks!
Hey Seth,
I just saw this message. If you still have it, I'll take it!
-
Re: Hose Holster -Blowhose Holder-
you are welcome to it Jon! I just reopened my shop today. I was out of town and had to close it for a couple days. =)
you should go through etsy.. if it gives you problems, email me firekistglass@gmail.com messaging through the board is not easy for me.
thanks!!
-
Re: Hose Holster -Blowhose Holder-
Originally Posted by
Firekist
you are welcome to it Jon! I just reopened my shop today. I was out of town and had to close it for a couple days. =)
you should go through etsy.. if it gives you problems, email me
firekistglass@gmail.com messaging through the board is not easy for me.
thanks!!
Just placed the order, Thanks Seth! My Fiance just placed an order from you 2 nights ago for a blow hose and swivel. If you didn't ship those yet, can you ship everything together to save shipping costs?
-
Re: Hose Holster -Blowhose Holder-
Thanks Jon! Glad we got those combined and upgraded and squared away. Happy Birthday!
I'm back from vacation, for anyone that was waiting!
I'll keep these Melting Pot specials available.. hopefully until I get Yinz taken care of =)
Thanks!!
-
Re: Hose Holster -Blowhose Holder-
You guys... this thing is sweet. Just got it. Will give a better review after some more use, but so far the best (tiny) investment I've made in a long time.
-
Re: Hose Holster -Blowhose Holder-
be sure to watch my youtube video! i wouldn't say that unless i really really really thought you should watch it to be confident to make the changes to make it really fit you well.
i mean.. you could get lucky and it would fit well as is, but i cut almost 9 inches off the neck wire for my personal fitting.. and some off the orange tube coming up to the mouthpiece from the T.. i don't think i mentioned that in the video.
anyway, i'm glad your first impression was good yinz! today i taped my phone to it to do a live IG video.. butmy phone ended up overheating =)
-
Re: Hose Holster -Blowhose Holder-
Yo Firekist!
Hey man Ive had one of your swivels for years and love it! great product.
I stopped using a blowhose bc ive bee3n having problems finding "boots" that will securely hold a 12 mm tube, and having to tape the blowtube into my setup is just a bitch to have to do every time. I ordered 2 diff sets of boots from BS a while back thinking they would solve my probs but neither boot fits! luckily they were cheap. Im about to scoop up one of these, but if you could help me out w finding the right boots I need, so I can finally start using my goddamned blowhose again I would really appreciate it! and even to fit the 9mm tubing would be great as well, as I sometimes use that for handles as well.
J
"LIve to Love, lOve tO lIve"
-
Re: Hose Holster -Blowhose Holder-
FWIW nube's short use, I stumbled onto using the outside caps used to seal connections on 75 ohm coax cable. It fit my swivel and you can find them in different stiffness.
Last edited by slippin; 03-17-2017 at 03:52 AM.
Similar Threads
-
By blueburnsorange in forum Member's Glassifieds
Replies: 1
Last Post: 11-23-2013, 11:54 PM
-
By Ronnie Renee in forum Member's Glassifieds
Replies: 1
Last Post: 04-28-2009, 06:28 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Featured Member's Spotlight!
Bookmarks