Brass Fitting

[IsthmusColor]

Who made these stands?
My brass fitting has striped treads.
I need a new one for a phantom.

[snoopdog6502]

Put a nut on it.

[IsthmusColor]

Yes why I ask questions.
I'll give that a shot for sure.
Thank You

[Chad S]

http://www.acidflystudios.com/

[chillrelaxglass]

I have one I’ll sell Steve at acid fly doesn’t make them anymore I don’t think. Took me two years to find the one I got

[IsthmusColor]

Sent my phantom in to get cleaned. I'll try snoopdog6502 suggestion right away once I get it back.

[snoopdog6502]

The other alternative is to drill and tap it to the next size up. One side a clearance hole and tapped bigger on the other. Provided the piece that goes in there can be drilled too.

I made a part like that a couple weeks back for the remote control lever of a hydraulic spool valve for a tree trimmers boom truck but it had 2 balls with the a clevis.
The guy never paid me. It's one of those deals where they owe you and disappear.

[rez cash]

+1 for drilling and tapping a size bigger. Somtimes you can tap the same size and mush the threads back enough to grab

[Shattered Dreams]

you can also tap to the next size, and get a helicoil that will thread into the hole and bring it back to the proper size.