In order to search for plans or make one, or to buy one, you need to know what you need is commonly called a “whip”
In order to search for plans or make one, or to buy one, you need to know what you need is commonly called a “whip”
Those tanks have a brass fitting on them that connects to the homefill. If you take that off it should have a male 1/4inch npt thread.i attach that to a braided steal pigtail. At the other end of the pigtail you need attach a 3 way tee fitting. On the opposite side you need a fitting to attach on a full size oxy tank (it's called a cga-540 oxy nut and nipple). On the middle leg of the tee attach a pressure gauge so you now how much your putting in your tanks.
Here you go... Get some ideas.
http://www.talkglass.com/forum/showt...+homefill+whip
Maybe air for a herbie or gtt
if you don't want to piece one together on your own, you can buy them pre-made. salt city glass sells them, although imho a bit (ok, a LOT) over priced. link:
https://saltcityglass.com/products/homefill-whip/
also if you google "oxygen transfill hose", you'll find a few other places that sell them pre-made.
You shouldn't be having sex for pleasure, only for reproduction.
Thousands of people read my threads now. So I’m trying to not embarrass myself.
Don't forget to get the green thread seal tape for oxygen. In my research, I learned that compressed oxygen is nothing to fuck around with, so take every precaution you can if you are assembling your own whip.
Josh
Confessed compulsive glassturbator
GTT Mirage, Homefill, top-loading/hand-roasting Paragon kiln
Bookmarks