AIM Crucible Furnace Kiln (s): 30lb & 90lb Kilns

[Feel Good Glass]

Wasn't sure if this should be posted here or in vendors...anyhow...Hey guys and gals, happy New Year!!!! Going to be moving later this year and am having to break down the shop to make adjustments for the future! It is extremely hard for me to part with these kilns; but knowing they will go to a great home and get lots of love makes it easier Im looking for cash but am in the market for a small lathe as well. I have the following that is available:

(A) AIM 30lb Crucible Furnace kiln w/ FUJI PXR3 Controller (Asking $1350 or trade)
(B) AIM 90lb Crucible Furnace kiln w/ FUJI PXR3 Controller (Asking $1700 or trade)

(A) The 30lb unit was used a great deal over the past 10 months, usually for 7-10 day sessions. The elements were just replaced with brand new ones from the manufacturer and only have about 168 hours on them since then. This unit was babied and has little to no wear on the outside, and the lid(s) show the usual wear from the original seasoning process. The inside walls are in great condition with little to no glass stuck in it. The floor shows the most signs of wear; this is a normal part of the process from time to time during loading or pulling product out of the furnace (see pics). All of the metal is in good condition except for one hinge on the side, this past always seems to rust out on all the units Iv seen and should be a VERY cheap fix (under $20).

B) The 90lb unit was only used for 8 days, so it is in near mint/ almost new condition inside and out. The lid (s) show normal cracking from the original seasoning process. All metal is in great condition with the exception being the same hinge as mentioned in the previous paragraph; once again this is a very cheap (under $20) fix.

I would prefer to not ship these kilns... but will do so if necessary. The kilns are located in North Florida. Im flexible about driving to meet you within reason so don't hesitate to ask. If we consummate a deal on the units, the buyer is responsible for all costs associated with crating and shipping the unit(s). I can accept credit cards, bank transfers, cash, paypal. If you choose to pay by credit or paypal there WILL be a small fee associated with the transfer of funds. Please feel free to ask me any questions and I will answer as quickly as possible. PLEASE serious inquiries ONLY!! Thanks!!

-John