dildos/safty/legalities?

**mistahead** · 02-08-2007, 11:49 PM

people want dills! i wasnt into trying to make them before because of possible safty issues and legalities, but ive made a few lately as gifts and stuff, now a bunch of people want them. so with something like this is there anything i should be worried about if something went wrong?? or someone was injured while using one? do i need to get a waiver of some sort? put a disclaimer on them? should i maybe get a polariscope to check for stress after. dont need to get sued or anything now do we!!

**jeves311** · 02-08-2007, 11:52 PM

I'd just say they're aren't functional, but of course they'll use em

**nasty** · 02-09-2007, 01:48 AM

thats what i'm goin to do is get a polarawhatevathe fuck its called and make sure u really fire aneal them good, no stress and u should be good, o' incase all color and fume

**tristanr** · 02-09-2007, 01:57 AM

wont the fume come off with use?

try explaneing that rash to your doctor

**somberbear** · 02-09-2007, 06:45 AM

polariscope... two polorized filters with a back light....for showing stress....

big problem is that it doesnt work on color like it does clear.....

i make mine out of clear... clear is so sexy if you can get your form down proper.

Ummm .... dont know about legalitys.... i aneal .. check in a scope if it has minimum stress... then i sell it... but i also only do custom work so i can talk to thine and tell them not to use it like a hammer..... consitering the act... i dont think a properly constructed dillie would ever break..... but you never know....

I would just use clear to your comfy that you can create a peice with colors that wont effect the strength of the peice.... i would figure solid colors would be best....

Some states have bans on sexual or marital aids.... most the time these products are sold under a novelty or personal health care names..... as far as i can remeber.

peace rob

**ech** · 02-09-2007, 07:11 AM

I was trying to sell a porn store some extra dillis I had after valentines day one year, and they started saying that they heard a story about a dillis from a local blower breaking off inside someone. They were actually being kinda rude and mocking so I slammed one on their counter and chipped a big chip in their counter and not even a scratch on the dilli. They got even madder and threw me out me all the while I was laughing my ass off.

**Jerry Gash** · 02-09-2007, 07:47 AM

I am in the process of trying to make a few, i ordered 1" clear apparently all the girls i know have "large vaginas" because they all complained that 1" wasnt even gonna hit the sides. Now i feel kinda insecure.....

Anyone know where i can get 4" black rod?

**max16o2** · 02-09-2007, 08:10 AM

hahahahaahhahahahahhaHAHAHA on the last 2 posts

**smutboy420** · 02-09-2007, 08:43 AM

lol lol

**ShttrdSpctrm** · 02-09-2007, 09:06 AM

if someone breaks a dilly off inside them, they need help

**SteppingRazor** · 02-09-2007, 09:41 AM

you would need some sort of ninja snatch to break a glass dilly. seriously i doubt any of those stories about them breaking inside a customer are true.
since they are made from glass and not latex they really are'nt met for anything other than solo use. you can really damage someone's genitials ramming furriously ramming it in and out.
~joe

**Pilgrim** · 02-09-2007, 10:06 AM

heyn i make mine line of dills on 38mm xxhwt full of color and gold fume , some times i use opals in them ... very high end toys, the tubing is stronger then solid rod and will take more abuse "lots of it".... the funny thing is i make alot of them for my wifes friends....hehehe sort of wierd knowing my handy work is getting them off when there spouce cant.....
I have a line of hollow dills that hold a small vibe.. most of them start at $150.00..... NEVER HAD ONE BREAK OR COME BACK
making lots of ladies cummm ....
Scottland FredHead Glass

**dnug42** · 02-09-2007, 10:20 AM

yea clear is cool but tube collapse is way cool- latty inside...looks dope the girls seem to like the bumpies as well- opal inside- nice one- yea i would not go with fume on outside......

**nick84** · 02-09-2007, 12:10 PM

This thread is too funny..hahahaha....

**billtcat** · 02-09-2007, 02:49 PM

ok who is going to post a tutorial on this?

**Abe Fleishman** · 02-09-2007, 04:35 PM

Talking about breaking dillis. I saw some import dillid from China years ago and the were crazy scary for the ladies. There was stess cracks and none melted tickle spots. This might have been only samples but a store I was selling to had them and said there was no problems with them, when in the back o9f my head I was like scary.
Abe

**UmaJulz** · 02-09-2007, 04:38 PM

Watch Real Sex on Thursday nites- HBO- they frequently have the glassblowers on making dillies on the lathe or whatever-scientific blowers gone to major dilly production, and loving it! Plus you get to watch the research and development, and product testing segments too!

haven't seen one in a while, so it must be time for the reruns...

**UmaJulz** · 02-09-2007, 04:40 PM

Yeah, cracks- that would be very scarey.

the only thing I could think of possibly breaking might be the handle on a juicer- and that could be bad for the operator LOL

**Greymatter Glass** · 02-09-2007, 04:43 PM

Yeah Abe, I have seen those around here as well.... one shop had a few a while back that were either import or really crappy domestic, with cadmium colors all boiled and rough on the outside..... I kinda cringed thinking about the poor girl who got one of those. Some people should stick to selling tie dyed shirts, inscense, and fake dread hats.

as for size... yeah... I made a few a while back and showed them to some of my female friends and to my surprise they were all whores too. They wanted much bigger. I figured I'd find some 50mm rod (anyone know who has some? I know corning has made it in the past) and chuck it in a lathe and shape it into a fist and show that to some people.... see what they say.

-Doug