Some new stuff

**CripSkillz** · 05-06-2007, 07:09 PM

Thx guys ya that fume came out good better now that i know not to slop it on, it was jstu a bunch of multi rods lati from scraps and it was the only pice that sold today, my local rc field is over the limit need to start makin em thin so dey break quicker LOL kinda cool that every one is passin round somethin i made and they actually like em

**Headchange** · 05-06-2007, 07:59 PM

adding a dash of gold before and after the silver you are doing would really make that comb pop

Not the only way.. but I love it personally

**jethro** · 05-07-2007, 03:34 AM

Hey Crip the comb's are lookin hot...actually all of it is.

Guess im gonna have to try to bust out my first honeycomb this morning,doubt it will work but ill still try it.

try making the comb like a pendant and just flare the end of the tube and fit it just inside seal it up nice and blow it out...someone else already said it but I think that would probably be the easiest way...its how i made the last spoon I posted and I am not even half ready to try inside out yet,It shoud be easy for you.

but then again blowing it out will probably distort the design...idk Ill try it and see how it works and report back..

**CripSkillz** · 05-07-2007, 09:49 AM

go for it bro try it out deff not easy for me I still havnt sealed up 2 pices nicley , i may try again today and see if i cant frustrate my self naw maybe not but i gotta make a greenish pice today for my girls work friends b day so if I go do it now should be rdy for 2night

**jethro** · 05-08-2007, 04:04 AM

hey man...I just put a pic up on my thread.

I ended up just fuming a really thin maria on the end of a 16 mil rod and then fused that to the end...pulled off the 16 mil blew it out then dotted the outside.

it kinda worked but I'll have to work on it some more

and I have found the key to joining 2 pieces togeather is gettin em rippin hot then stick it all togeather (make sure there are no air holes) and then GENTLY push/pull/blow to even it out...but I have only done this on the end of tubes,I'm sure it is much more difficult if your trying to join 2 hollow pieces for a bub or something especially at an angle.

**Headchange** · 05-08-2007, 02:22 PM

Wheres the pic of the greenish piece.. curious how the combs are coming

**CripSkillz** · 05-09-2007, 08:54 AM

HAHAAHHA lets not talk about that Fukin gfreeeeeeen are pissin me offf there always checkin on me so I had a bad day the other day, and the 2nd one i made had the punty atached to good so when i went to tap it off i broke a chunk of the pice out and had to put a nasty blob on the end where i didnt want one, and havnt even tried a nother comb yet actually havnt made anythin good in days but its been hot and I cant stand it, so i think im gona work tonigh after dark ..

**CripSkillz** · 05-11-2007, 08:51 AM

Heres the stuff from yesterday, i was messsin wif more outside work and got some cool lookin results its all encased outside anyways

**mer** · 05-11-2007, 08:55 AM

lookin good. maybe melt the marbles in a bit more (middle piece). the silver ones are going to look cool when they color in and your i/o looks all the way melted in (i might have pushed the bowl so that tight ass twisty cane was up top for everyone to see). mouthpieces are looking better too. good job mang!

**jethro** · 05-11-2007, 09:06 AM

lookin good....what colors did you use on that middle one?

**CripSkillz** · 05-11-2007, 09:36 AM

Thx Guys , monkey your right that would looked betta try it nextime , jethro
thoes colors it was 3 lil stripes 1 ea of alaskin thunder silver seawead, and blue thunder, then i got em reall hot and swirled in teh clear to mix and encase some at teh same time kinda cool effect i may take some betta pics lata

**CripSkillz** · 05-17-2007, 11:34 AM

WELL I almost had a cool one had it almost done then the whole end cracked big ,,BS so I had to super melt hte end after I already had all teh holes in it was a bitch so now it looks like crap oh welll

**CripSkillz** · 05-18-2007, 08:48 AM

Well its official I finally made some cool lookin stuff, I need to practice the bender back some more was kinda gettin it, stick stack is the shit I still got some more left it goes a long way, i think ill make some more stuff today WEeeeeeeeeeeeeeeeeeeeeeeee

**mer** · 05-18-2007, 09:12 AM

nice work crip, you are really working your color well and the cadmiums aren't easy.

**garrick** · 05-18-2007, 09:14 AM

wow those are tight! big jump for ya

**The Lorax** · 05-18-2007, 09:16 AM

i like the left one and especialy the lack of blue.... not a big fan of opposite color combonations but i am with ya on this one. i've yet to get the tubes to try a stick stack, seems fun though

**ShttrdSpctrm** · 05-18-2007, 09:45 AM

holy shit! crip ur fuckin rockin it dude. very nice, stick stack is not too easy, ive only done a couple , so i imagine it just gets easier. keep up the progress, ur doin great.

**newmexicomagma** · 05-18-2007, 09:50 AM

hell yeah lookin sweet buddy. i like ur stick stack nice colors. be sure to fire polish your bowls too. especially on nicer pipes, i think it just looks smoother.