some 3/8th and 1/4" 90 and 180 stainless steel V2 double swivels

[Firekist]

4th post eaten.. even the clipboard twice.. ugh.

3/8ths 90s (top 6) $60 each (6 avail)

3/8th straights $60 each (6 avail)

1/4 long legged straights $50 (2 avail)

1/4 long legged 90 $50 (2 avail)

1/4 straights (regular length legs) $45 (lots avail)

1/4 V2 90s $50 (lots avail)

Email before payment for 3/8ths and long legged versions.
firekistglass@gmail.com

[Kato]

Woot woot thx again Seth!

[Firekist]

Updated quantities:
3/8ths 90s (top 6) $60 each (4 avail)

3/8th straights $60 each (4 avail)

1/4 long legged straights $50 (2 avail)

1/4 long legged 90 $50 (2 avail)

1/4 straights (regular length legs) $45 (lots avail)

1/4 V2 90s $50 (lots avail)

Email before payment for 3/8ths and long legged versions.
firekistglass@gmail.com

all of these are enroute to AGE. I should have plenty of 1/4" with me, but still only a couple 3/8ths. i'm working on them!
thanks!

[RamblezMarblez]

Email sent....just got my taxes back!!!

[HomegrownGlassStudio]

Can you make me up 10 straight ones with 1/4 on one side and 3/8 on the other?

[Firekist]

I will check with the machinist..I don't see a problem with that.

But.. can you explain why you'd want that? Eric was thinking the same thing, because the holes on most nested stopppers is 1/4.. so that'd fit niely, but I don't think you are going to improve your air flow/reduce back pressure with that 1/4" barb still on there.

I'll look into it, but I would like to understand better myself as well.
thanks!

[Simian]

lol, that is what I am waiting for.

[HomegrownGlassStudio]

I wrap heat tape around them for certain uses so I would rather get one end bigger so I have to use less...

[Firekist]

Ahh, now that reason makes sense.
I already asked the machinist, im sure it wont be a problem, more a matter of time. I told him to make the 1/4" side a bit longer than they are on the 1/4" 90s, as its generally nice to have a bit more length on the lathe.

Blastshield will be carrying these swivels now, so be sure to check our darryl's display whenever you see him!

Thanks!
---seth

[Firekist]

3/8ths 90s (top 6) $60 each (0 avail)

3/8th straights $60 each (0 avail)

1/4 long legged straights $50 (1 avail)

1/4 long legged 90 $50 (0 avail)

1/4 straights (regular length legs) $45 (lots avail)

1/4 V2 90s $50 (6 avail)

Thanks to all that stopped by my AGE booth, and for the ..50 or so that got these from Blastshield's booth.

Sorry lupe, your 3/8ths are now darryl's examples. I will be talking with the machinist lots this week.

Cheesebox, your 3 went home with maya.

[Firekist]

3/8ths 90s (top 6) $70 each (4 avail)

3/8th straights $60 each (10 avail)

1/4 long legged straights $50 (0 avail-out of production)

1/4 long legged 90 $50 (0 avail-out of production)

1/4 straights (regular length legs) $45 (9 avail)

1/4 V2 90s $50 (lots avail)

simian, dave, how long would you want the 1/4" barb to be? i thought longer than is on the 1/4 90, because those are kinda short. if there is anyone else wanting these, please let me know. it may take weeks before these can be squeezed in, and i'd like to get them done in one shot.

Thanks!

[Simian]

I am good man. Just got mine from you. Thanks!