Lathe, Torch, Raw Glass, Tools, Ventilation & more

[PGiftsPA]

Up for sale is an entire glass blowing studio.

Bethlehem GL50 or GL50a Lathe
Great condition, runs true, double grabbing chucks, etc.

Bethlehem PM2D Watercooled Torch
Great conditon, comes with pump, lines, and resivour for water jacket.

Raw Glass
Cases of tubing for lathe and torch. 33Coe color rods, 8 new cases clear tubing, various color tubing for the lathe as well. Joins male and female 14mm & 18 mm

Ventilation
3000 cfm stand mounted fans, worked great in our garage studio. Less than 100 hrs use.

Tools and Supplies
Frit tray, graphite paddle and reamers, manifolds, standing mats, etc.

Workstation
Custom built 4 person work table hardibacker surface

Hand Torches
2 hand torches one with 6 changeable tips

I'm looking for 7k for everything which is a steal. Come check out in person anytime. Located in Spring City, PA.

call 484 624 7128

I will sell it piece by piece but I just want to move it fast as its not being used. Make it easy for me and I'lll make it easy on your pockets. thanks guys

[glassblowingBiker]

do you have any pics of the lathe ? thanks Jeff

[Jeffs Pieces]

Called, no answer. Email me Jeffspieces@yahoo.com

[PGiftsPA]

Here are some pics..
Sorry about missing the call I don't normally answer private numbers. Give me a call back and I'll answer

[misticglass]

if you want to sell that multijet handtorch seperate let me know. thanks.
misticglass@gmail.com

[TlkQ]

So... The lathe is not assembled and operational?

[PGiftsPA]

The lathe is 100% assembled and fully operational....it's mounted on a wood board so you can easily move it around, could easily remove the wood board though. I have a custom torch mount for the lathe too.

[brettodie]

thats a bethleham model a, not a pm2d so you know. how much for it? also do you have the base? peace brett

[PGiftsPA]

Everything works 100% and can be checked out/tested in person at my retail shop. Call me, I'm asking $7k on everything but will accept offers to break it down. I can ship as well. The torch is an older model but I purchased it as a PM2D from this forum from mind blowing glass and it served our artists well. Unfortunately our project is over and I no longer have artists working with the equipment.

484 624 7128

[Lux]

The torch is a PM2D model A. The newer ones are PM2D model B.

[Burny Kay]

if you part it out, ill be interested in the tools, send me some pics. if you give it a couple of days and wait for people calling dibs, youll sell everything just separately shipped. but let me know about the tools, i could use some tools

[Feel Good Glass]

PMed

[Architeuthis dux]

how much for the 6 jest hand torch shipped to 23220?

[funksizzle]

I'm wondering what the price on that 6 jet handtorch is too

[oz914]

Interested in the glass. Please pm me a list and prices of what you have. Thank you...

[LTD]

interested in lathe

[standard28]

Isn't the lathe missing on of the weigh bars? Looks like only one bar in front?

[EFS]

Isn't the lathe missing on of the weigh bars? Looks like only one bar in front?

Was thinking the same thing. Never seen one of these with one? I am no expert by any means but have seen a handful of these machines and never seen them with only one.

[neddowerx]

If anyone gets that model A, plug only the outermost 18 gas ports leaving the oxy ports in that row open, you will have much better combustion and be able to achieve much more heat and size wide and long. I use 19 gauge brass wire, this is exactly what beth did to change the model B, except they added an extra row of oxy ports instead of taking away the outer gas ports, so you'll get a flame as hot as the B, with a tighter flame shoulder but still way bigger and nicer than the A as it came new. I've owned and modified many, and by using the wc it will last decades longer. Can we get a face pic and individual price?

[professorglass]

damn... it sold