Carlisle CC
| (2 intermediate revisions by one user not shown) | |||
| Line 1: | Line 1: | ||
| − | [[Image: | + | [[Image:Burner30.gif]] |
== '''Overview''' == | == '''Overview''' == | ||
Made by Carlisle Machine Works of Milleville, New Jersey, the Carlisle CC burner produces any type of flame from a pin-point flame to a bushy 2 inch flame. It operates two separate flames, a pre-mix center fire and a surface-mix outer fire. | Made by Carlisle Machine Works of Milleville, New Jersey, the Carlisle CC burner produces any type of flame from a pin-point flame to a bushy 2 inch flame. It operates two separate flames, a pre-mix center fire and a surface-mix outer fire. | ||
| Line 6: | Line 6: | ||
== B&P v. R&P == | == B&P v. R&P == | ||
The torch comes with one of two mounting systems. The ball and post system consists of a ball and socket type connection between the torch and base. This connection allows the torch angle to be adjusted side to side as well as up and down. The downside is that adjusting the angle requires two hands, one to loosen the thumbscrew and one to actually move the torch. The rack and pinion set up consists of a pinion gear, which allows the torch angle to be more greatly adjusted. It also only requires the use of one hand to adjust the angle. | The torch comes with one of two mounting systems. The ball and post system consists of a ball and socket type connection between the torch and base. This connection allows the torch angle to be adjusted side to side as well as up and down. The downside is that adjusting the angle requires two hands, one to loosen the thumbscrew and one to actually move the torch. The rack and pinion set up consists of a pinion gear, which allows the torch angle to be more greatly adjusted. It also only requires the use of one hand to adjust the angle. | ||
| − | [[Image: | + | |
| + | [[Image:CC_Plus_B_P_TN.JPG]] The ball and post option. | ||
== Cooling == | == Cooling == | ||
The torch uses aluminum cooling fins to keep its body temperature down while working. Carlisle also offers a water cooling jacket that can be installed on the torch to keep the temperature down. | The torch uses aluminum cooling fins to keep its body temperature down while working. Carlisle also offers a water cooling jacket that can be installed on the torch to keep the temperature down. | ||
Latest revision as of 22:44, 6 June 2007
[edit] Overview
Made by Carlisle Machine Works of Milleville, New Jersey, the Carlisle CC burner produces any type of flame from a pin-point flame to a bushy 2 inch flame. It operates two separate flames, a pre-mix center fire and a surface-mix outer fire.
[edit] B&P v. R&P
The torch comes with one of two mounting systems. The ball and post system consists of a ball and socket type connection between the torch and base. This connection allows the torch angle to be adjusted side to side as well as up and down. The downside is that adjusting the angle requires two hands, one to loosen the thumbscrew and one to actually move the torch. The rack and pinion set up consists of a pinion gear, which allows the torch angle to be more greatly adjusted. It also only requires the use of one hand to adjust the angle.
The ball and post option.
[edit] Cooling
The torch uses aluminum cooling fins to keep its body temperature down while working. Carlisle also offers a water cooling jacket that can be installed on the torch to keep the temperature down.
