Kiln
From Melting Pot Wiki
(Difference between revisions)
m |
|||
| Line 4: | Line 4: | ||
the kiln is also used while a large multiple section piece is being made. for example section A is made,put in the kiln, then section B is made,put in the kiln then section A is attached to section B and so on. | the kiln is also used while a large multiple section piece is being made. for example section A is made,put in the kiln, then section B is made,put in the kiln then section A is attached to section B and so on. | ||
| + | |||
| + | |||
| + | It is typical to set the temperature in between 1050-1150 degrees F when working with boro glass | ||
Latest revision as of 19:51, 2 June 2007
Kiln
a kiln is a very important aspect of glassblowing ( lampworking) it is used to anneal a piece at the end of the day by following a ramp down cycle.
the kiln is also used while a large multiple section piece is being made. for example section A is made,put in the kiln, then section B is made,put in the kiln then section A is attached to section B and so on.
It is typical to set the temperature in between 1050-1150 degrees F when working with boro glass
