HMK's mediocre glass thread

Why is that shape so popular for oil, meaning the mouthpiece stem almost being part of the can?? Does that ever cause splashback?

Seems like a regular bub design would work well for these, but its not often used(regular bub meaning long can bubble on bottom and stem attached at the top of the can section.)

no splashback. that little blue one came close but doesnt if filled properly. it allows the proper fill level. i'm not sure if the style you mention is good or not for this, all i know is its pretty much - the smaller the better is the main thing that is important. if one made a really small one like you said it'd prolly work good too.

Quote:

---

Originally Posted by l33t:weasel

hey kut, how big are those things anyways?

---

maybe 5-6 inches tall? a big one is like 6-7 inches. some have been taller, a few of my sisters.

lookin good!

i thought the design would splash but was pleasantly surprised to find no splashback even when pulling air forcefully.

Quote:

---

Originally Posted by hashmasta-kut

no splashback. that little blue one came close but doesnt if filled properly. it allows the proper fill level. i'm not sure if the style you mention is good or not for this, all i know is its pretty much - the smaller the better is the main thing that is important. if one made a really small one like you said it'd prolly work good too.

---

Ok so the main goal is a small volume inside the rig?

Quote:

---

Originally Posted by hashmasta-kut

maybe 5-6 inches tall? a big one is like 6-7 inches. some have been taller, a few of my sisters.

---

Got any pictures of your sister

's work?

Quote:

---

none have broken so far, so i dont see why i should go back and learn the basics

---

I don't think I could have summed up the problems that the pipe field faces quite so succinctly myself. Truly, you have given them voice.

i'm not sure if you are misinterpreting me on purpose, but feel free, i don't really care. i feel i have a good grasp of basic skills. i have some good books and have read them lots, and always work towards doing better work, so i improve. like i said, if it dont break, dont have to fix it.

Quote:

---

Originally Posted by Swampy

Got any pictures of your sister

's work?

---

what are you kidding? you have seen many of her units i am sure. i just started one year ago. all the units before that without recessed joints are hers.

Swampy means he wants pics of your sister.. Maybe one of her holding a "unit" lol

I watched one of your swing arms get killed tonight. Some one stuck their ti plate in front of my delta while I was working (lol) and the spoke vaporized :( oops.
Dude who owns it was pretty bummed.

hahahahahaha bet he had a smile on his face then a sad face haha classic

whoops:chilling:

Quote:

---

Originally Posted by hashmasta-kut

gotta make yer own prolly, i never found any here.

---

Not too hard all ya need is a m/f 19/26, a little hole poppin, and some butane...so great

Quote:

---

Originally Posted by Forche

Not too hard all ya need is a m/f 19/26, a little hole poppin, and some butane...so great

---

and viola u gots unkle errrrl hangin out..... but careful hes someone that is hard to get rid of!!!!!!!!!

Quote:

---

Originally Posted by Forche

Not too hard all ya need is a m/f 19/26, a little hole poppin, and some butane...so great

---

i dont even use any m/f. just a piece of 32 x 4 with one entrance hole, open on the other.

^^^^ yep! gong joints just make it harder to get out then doing large amounts.. but if ur only doing a lil bit then there ok... i need to get those huge joints for extractors then itd be blingin

mountain glass and a few others sell really large ones.

i just use a 3ft piece of 50x5 flared a bit at end closed off on the other,, wrks great..

cute horns :). you goin to champs fwiend?