HMK's mediocre glass thread

**Kalera** · 02-17-2011, 07:39 PM

U trollin?

**hippi** · 02-17-2011, 07:54 PM

lol

**Albino Sasquatch** · 02-17-2011, 09:32 PM

just watched the video and you are a 20 year old jumping up and down and crying... why dont you just show you bumping one of your curves and it breaking, that design is super sketchy as far as stability wise. to bad you had to crush that nice piece just to prove how much of a child you really are. you sir are laughable haha

**Uriel** · 02-18-2011, 12:28 AM

just shows how much respect he has for other artists work.. a collector who'll drop a brick for effect.
Hey Kut that rock's normally the one you leave for use on the chicks right.. spectrofluro analisys on it via ytube showed traces of semen and ass juice.. I mean what kinda guy hasa big assed rock just sat in his room...
Captn Cavemanananananan
LOl just joking..... or am I....

**ALIEN!** · 02-18-2011, 01:35 AM

Yo Kut, back in the day Jason Lee put out a vid of himself smashing a $1000 heady (I believe it had a flaw, so he released some stress) anyway, point is, he smashed his own shit. Now, I don't care one way or another, but it seems to be one of the root causes of people to target you. Might be a good idea to pull the video. Like I said, I don't care one way or the other, just lookin out.

On a side note
I challenged Nate Dark to a match of war at the first glassroots show, one of my spoons against his. I thought I had the upper hand, I was using a prodo frit spoon, he was using a nice worked spoon with a wig wag disc. I figured the extra work on his might have made it a lil weaker, I was wrong, and pieces of my spoon flew all over the area by our booths LMAO. I like breakin shit too. His piece lived with just a lil surface crack, like a lateral dimple, prolly polished right out. He asked if I wanted to bring it back....I declined LOL.

**miniGlass** · 02-18-2011, 03:03 AM

yo dawg the beer mugs rule!

-mini

**mouseclone** · 02-18-2011, 06:40 AM

Originally Posted by Kalera

U trollin?

Reminded me of this. Fuck'n Boxxy

http://www.youtube.com/watch?v=Cdiz0k0Rudw

**Headdi Retti's Glass Art Studio** · 02-18-2011, 06:53 AM

Lol, Kut, I got to say u have the most entertaining thread on the TMP, although I know you really are just looking for that 0 rating, the HMK motto "pissing on or off glassheads one at a time!", Awesome Bro your doing it!....in the word's of Charles Barkley, that's terrible, just terrible!.....

Thx Man for the support here on TMP!, That's Awesome!.......Man, tell me your gonna be at the agi! ....

**Dom** · 02-18-2011, 08:08 AM

Originally Posted by Headi Retti's

Lol, Kut, I got to say u have the most entertaining thread on the TMP, although I know you really are just looking for that 0 rating, the HMK motto "pissing on or off glassheads one at a time!", Awesome Bro your doing it!....in the word's of Charles Barkley, that's terrible, just terrible!.....

Thx Man for the support here on TMP!, That's Awesome!.......Man, tell me your gonna be at the agi! ....

Dude you are starting to remind me of Ross from ABR with all those exclamation points, are you really that excited about Kut, Brotha?

**hashmasta-kut** · 02-18-2011, 08:25 AM

Originally Posted by Uriel

j I mean what kinda guy hasa big assed rock just sat in his room...
Captn Cavemanananananan
LOl just joking..... or am I....

haha, its a large fossil. my buddy found in the river. largest one we found like it, pretty cool.

none of you were around when that shit went down, so you dont know the reasons. you would of had to be in a pretty small circle to get the point too, it was made mainly for one person. many people take it the wrong, way, whats new? people often get the wrong point when they dont know the full story. i said no offense to the artist in the video; no offense was meant to glass art.

**FishOutOfWater** · 02-18-2011, 08:53 AM

people take shit too seriously. sure it was a nice dome but its glass. Its all gonna break eventually. Keep doing what your doing kut, and keep pissing everyone off.

**hashmasta-kut** · 02-18-2011, 09:27 AM

Originally Posted by Dom

Dude you are starting to remind me of Ross from ABR with all those exclamation points, are you really that excited about Kut, Brotha?

he must be faking it. that last comment, you gonna be at AGI!!? thats the one that made me think its his way of funnin'

**Kalera** · 02-18-2011, 11:40 AM

Originally Posted by mouseclone

Reminded me of this. Fuck'n Boxxy

http://www.youtube.com/watch?v=Cdiz0k0Rudw

Ahahahaha

The Boxxy of the lamper world!

**sleepingpeople** · 02-18-2011, 12:18 PM

Originally Posted by hashmasta-kut

we all are. pale shadows of our real selves on the forums.

not far from the truth man. Personally i like to be as much myself as i can. I have found some of the people on these forums are people i will come to meet at some point or another in my life, or look to for some actual help or advice. Its funny though when you have the internet acting as a shield or whatever its easy to become mis guided/directed.

can we see some more glass? Doing any more mugs man?

**FredLight** · 02-18-2011, 01:32 PM

I just had some time before stepping into the shop,

I watched those videos.......hilarious and sad.

I think you need some help.

Good luck Kut.

**hashmasta-kut** · 02-18-2011, 03:59 PM

i made a vape sleeping, i'll take pics tomorrow. i made a groovy tube pull too, double sided alien tech for dishes, so the inside of a dish is not just unobtainium, but looks the same as the outside, pretty nice. i actually used AP for the inside and lokis for the outer.

**sleepingpeople** · 02-18-2011, 04:27 PM

thats really neat. I freakin need to learn how to do tube pulls. I bet you did make a vape

chock 1 off the list lol
you got my pm prob, catch you around man

**Albino Sasquatch** · 02-18-2011, 08:20 PM

^^tube pulls are easy man paint lines on tube melt in, then heat and pull. bam tube pull.

**steak351** · 02-19-2011, 03:11 AM

yeah start small, and practice until you got the hang of pulling and blowing, the first couple times mine where unsuable thin or thick but after some practice it gets easier

**hashmasta-kut** · 02-19-2011, 04:15 AM

also trapped air bubbles and boiling need to be figured out, as well as cracking problems on larger ones, if you dont melt it all in good as you go. the 4 layer piece i made recently was a bitch. it cracked a few times, fell on the floor as both handles fell off one after the other, tried to burn me on the way down, but it ended up coming out good after all the hassle.