Fresh out of the kiln

**hashmasta-kut** · 08-02-2015, 05:29 PM

nice stuff all!

**istandalone24/7** · 08-02-2015, 05:31 PM

**TacosGlass** · 08-02-2015, 06:05 PM

lovin the minis, what size are you using for the downstems? 9mm?

**Dan Kooper** · 08-02-2015, 06:25 PM

I'm using the tubing that comes with the 10mm joint. Just pop a hole in the rig, maria the joint, cut the joint to length, pop my holes, weld the maria into the hole on the rig. 12mm tube is the only tubing I'm using other then the joint

**istandalone24/7** · 08-03-2015, 03:29 PM

Few dichro minis.

**piedpiper608** · 08-04-2015, 02:42 PM

First and second mini tubes , and they sold too 😊

the second one isn't really out of the kiln yet but 😜

**Dan Kooper** · 08-04-2015, 04:41 PM

Another "mini uzi" toob. I'm sandblasting mini uzis and logos on them also.

This one jxbey did the color work on the piece and I did the horn/loop and assembly. As well as the milli/mib

**Dan Kooper** · 08-05-2015, 10:26 AM

More keychainZ

**istandalone24/7** · 08-05-2015, 05:12 PM

**Ray** · 08-05-2015, 06:28 PM

Nice Mib!
will you sell it with a mini lite?

**Nomad** · 08-06-2015, 06:06 AM

I like these!

Originally Posted by istandalone24/7

Few dichro minis.

**istandalone24/7** · 08-06-2015, 06:10 AM

Originally Posted by Ray

Nice Mib!
will you sell it with a mini lite?

nah i have no stock of uv lights. actually had a hard time parting with $ just to buy one for pics, but i guess if you're going to melt uv glass, people are going to want uv pics lol.
small keychain blacklights can be had for like $8 though.

thanks Nomad, i had a blast making those. cbs rainbow dichro (which i bought a 1/2 sheet of months ago and promptly forgot about) and TAG Europa Star, Simax clear. i put them through a 2nd kiln cycle and the silver glass "pops" way more now.

**istandalone24/7** · 08-06-2015, 06:12 AM

i wish my wrists could take more abuse (broke both of them back in 2000, titanium pins & surgery on both....and they HURT) because stuffing a point of 55mm with clear and color makes badass ribbon cane marbles (vacuum out the air one end to the other) but it's so heavy. i really need a set of rollers.